American Veneer White Oak Edgebanding gives panel and component edges a white oak surface that visually ties into matching sheet goods and solid stock, creating a continuous appearance across the project. The 1 mm thickness provides a substantial veneer layer along the edge, which supports light machining or trimming after application without cutting straight through to the core. The 15/16 inch width is sized to cover common 3/4 inch panel thicknesses with a bit of overhang, allowing installers to trim back to a flush, clean line. Being classified as wood edgebanding keeps this product squarely in woodworking workflows, so it fits naturally into cabinet, fixture, and furniture production where exposed substrate needs to be hidden. The edge banding product class designation signals that this material is intended specifically for edge treatment rather than broad surface lamination.
The American Veneer White Oak Edgebanding 1 mm Thick x 15/16 inch Width is dimensioned for edging panel and component sides within woodworking projects. Its 15/16 inch width gives installers coverage across the edge of typical sheet stock while leaving enough excess to trim for an exact flush finish. The 1 mm thickness behaves as a solid-feeling veneer layer at the edge, which works well where the finished part may be handled or bumped in regular service. As a wood edgebanding classified product, it fits into standard edge-banding and trimming stations on cabinet lines, keeping workflow straightforward. The white oak species identity allows this banding to serve where white oak faces or trims set the visual standard on the job.
American Veneer White Oak Edgebanding 1 mm Thick x 15/16 inch Width is positioned for woodworking applications where panel edges must visually align with white oak faces. In cabinet shops, the 15/16 inch width helps when edging typical case sides, shelves, and stretchers made from sheet goods, because it spans the edge with room to trim for a crisp line. For architectural millwork, the white oak veneer face can be used to carry the same species appearance across reception counters, wall panels, or built-ins, preventing the edge from reading differently than the main surface. In furniture or fixture production, the 1 mm veneer layer provides an edge surface that feels substantial when pieces are handled, supporting a finished look consistent with white oak components elsewhere in the assembly.
The 1 mm thickness of this American Veneer White Oak Edgebanding gives fabricators a measurable veneer layer to work with during trimming, helping reduce blow-through to the substrate when cutting flush. That thickness also supports light sanding or edge easing without rapidly exposing the core, which is helpful on parts that see touch or wear. The 15/16 inch width provides a practical balance between coverage and control, offering enough overhang to compensate for minor panel thickness variation while still trimming quickly on edge-banding equipment. As a product within the edge banding class, it is sized and intended for edge treatment, so it integrates cleanly into dedicated edgebanders and manual banding setups where repeatable, straight edges are essential. The white oak veneer face lets shops maintain species continuity at the edge, which matters when aiming for a cohesive appearance across doors, fronts, and casework components built from white oak materials.
American Veneer White Oak Edgebanding in this version is 1 mm thick, providing a substantial veneer layer that supports trimming and light sanding during edge-finishing operations.
The American Veneer White Oak Edgebanding has a width of 15/16 inch, giving coverage across typical panel edges with extra material for precise flush trimming.
This product is a wood edgebanding using white oak veneer on the face, aligning the edge visually with other white oak components in the project.
The edgebanding is produced by American Veneer Technologies, a brand identified with veneer materials, supporting consistent appearance across multiple jobs.
The VR-WOAK1516-1R part number identifies this specific American Veneer White Oak Edgebanding configuration, helping shops reorder the same 1 mm by 15/16 inch product.
The 1 mm thickness of this edgebanding offers enough veneer depth for trimming and light profiling, supporting a finished edge that feels solid in regular use.
American Veneer White Oak Edgebanding 1 mm Thick x 15/16 inch Width from Wurth Baer Supply is focused on giving panel edges a white oak veneer surface that matches related components. The 1 mm thickness and 15/16 inch width pair to support straightforward trimming on edge-banding equipment and manual setups. With its classification as wood edgebanding and its VR-WOAK1516-1R part number, this product can be specified for repeat use wherever white oak edges are part of a standard build.
Sold In: 1 Roll