Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
American Veneer White Birch edgebanding gives exposed panel edges a white birch veneer finish, so raw board edges visually match your white birch faces on cabinets, fixtures, or furniture panels. The product is classified as edge banding, so it is designed specifically to cover and finish panel edges in woodworking and cabinetmaking. The 5/8 inch width matches common panel thickness ranges, so you can cover standard board edges with enough margin for trimming while keeping waste low on repetitive runs. The white birch veneer appearance supports projects built with white birch faces, so drawer fronts, shelves, and casework present a consistent material look. The edgebanding uses a fleece back construction, so the backing stabilizes the veneer during handling and bonding, helping the strip stay flat as you apply adhesive and press it onto the edge.
The 5/8 inch width on this Cedan Inc American Veneer White Birch Edgebanding provides a size that covers typical panel edges with slight overhang, so you gain enough material to trim flush on both faces without excessive waste on each strip. The fleece back construction adds a stable backing layer to the veneer, so the banding handles more predictably when feeding it along the edge with adhesive, supporting a smoother press without the veneer curling. Because the product is classified as wood edgebanding, it is suited to finishing exposed edges on wood-based panels, so cabinet and fixture edges present a continuous white birch look once trimmed and finished in line with your overall build.
This 5/8 inch American Veneer White Birch Edgebanding Fleece from Cedan Inc is sized for use on many cabinet and furniture panel edges, so it aligns well with work on case sides, shelving, and door or drawer fronts that use white birch-faced materials. The edge banding is categorized under Edgebanding & Surfacing as wood edgebanding, so it is intended for projects where wood-based panels need a matching veneer edge instead of exposed core. The white birch veneer character supports installations that feature white birch on visible faces, so carcass edges can visually continue the same species around openings and corners. With the product serving as edge banding, it becomes part of the finishing sequence on shop-built components, so edges move from machining into edgebanding and then into final sanding and finishing with a consistent species profile.
The fleece back on this AEWBIR58-500 edgebanding stabilizes the veneer layer during application, so the strip lays flatter along straight or lightly curved edges, which supports an even glue line and helps reduce edge telegraphing once trimmed. That backing also gives the veneer additional support as you trim the overhang after bonding, so the cut follows the panel face more consistently through multiple passes on a production run. The 5/8 inch width is narrow enough for efficient material use yet broad enough to give working room for trimming, so installers can align the banding quickly and then remove the small overhang without cutting into the panel face. Because the product is identified specifically as American Veneer White Birch Edgebanding by Cedan Inc, shops can standardize on this reference for repeat jobs, so subsequent orders maintain the same veneer designation across matching projects.
This product is American Veneer White Birch Edgebanding, so it presents a white birch veneer face that matches white birch panel projects where a consistent species look is required at exposed edges.
The American Veneer White Birch edgebanding has a 5/8 inch width, so it covers standard panel edges with slight overhang for trimming while keeping material usage efficient on repeated cabinet or furniture parts.
The fleece back on this wood edgebanding supports the veneer layer, so the strip stays flatter during gluing and pressing, which helps create a more consistent bond and smoother edge after trimming.
This white birch edgebanding is from Cedan Inc, so shops can reference the Cedan name and the AEWBIR58-500 identifier when matching past work or documenting material choices on projects.
The product is classified as edge banding in the Edgebanding & Surfacing category, so it is intended for finishing exposed edges on wood-based panels used in cabinetry and similar woodworking applications.
The manufacturer part number is AEWBIR58-500, so shops can use this specific identifier to repeat the same American Veneer White Birch Edgebanding Fleece 5/8 inch Width on future jobs.
Choose this Cedan Inc American Veneer White Birch Edgebanding Fleece 5/8 inch Width when cabinet or furniture projects call for white birch faces and matching edges, so exposed panel sides, shelves, and fronts carry a consistent species look throughout the installation. The 5/8 inch width and fleece back construction support straightforward bonding and trimming along typical panel thicknesses, so you can integrate this edge banding into your normal machining, edgebanding, and finishing workflow with a repeatable material reference.
Sold In: 1 Roll