American Veneer Walnut Edgebanding Preglued 13/16 Width gives you a walnut veneer edge treatment sized for common panel work, so you can finish exposed edges to visually match adjacent walnut surfaces. As an edge banding from Cedan Inc, this product provides a defined identity you can specify by name when standardizing materials on repeat projects. The 13/16 inch width covers typical 3/4 inch panel thickness with a bit of overhang, allowing a trim pass for a precise, flush finish along cabinet and furniture edges. As a wood edgebanding product in the Edgebanding, Wood category, it aligns with projects that call for a genuine wood edge rather than a synthetic look. The preglued construction means adhesive is already on the banding, so you work with a single material rather than separate glue and edging during application.
As a preglued edge banding, American Veneer Walnut Edgebanding Preglued 13/16 Width carries adhesive on the back, so installation centers on activating that glue and pressing the banding into full contact along the panel edge. The 13/16 inch dimension gives a small margin above and below typical 3/4 inch cores, which helps during set-up because slight misalignment can be cleaned up with trimming rather than exposing the substrate. Being part of the Edgebanding, Wood category, this walnut veneer works in workflows where the fabricator wants wood edges that can be trimmed and finished along with the rest of the panel, supporting a uniform process from edge application through final sanding.
As an edge banding in the Edgebanding & Surfacing category, American Veneer Walnut Edgebanding Preglued 13/16 Width fits jobs that call for finishing exposed panel edges on cabinets, shelving, and furniture built with walnut-faced materials. The walnut veneer character supports use on vertical cabinet sides or horizontal shelves where an unfinished core edge would otherwise show at the front. The 13/16 inch width suits standard 3/4 inch panel constructions, so a shop working primarily in that thickness can apply the same Cedan walnut edgebanding across multiple components without changing edge stock widths. The product name and manufacturer part number AEWALN1316PG together define a specific walnut edging choice, which matters when a project spec or shop standard lists exact materials for repeatable builds.
The preglued construction of this American Veneer Walnut edgebanding means the adhesive is factory-applied, giving a uniform glue layer along the entire length, which supports more even bonding compared with spot-applied glue patterns. In use, that uniform adhesive layer helps the installer achieve consistent hold along edges, which can reduce touch-up along long cabinet runs. The 13/16 inch sizing is slightly wider than the common 3/4 inch core dimension, so installers gain forgiveness during placement while still being able to trim back to a neat line. The clear identification as a Cedan Inc edge banding in the Edgebanding, Wood product class helps purchasing and production align on the same walnut edging, which supports consistent appearance when projects are built in phases or when matching earlier work.
American Veneer Walnut Edgebanding Preglued 13/16 Width is a Cedan Inc wood edge banding product using walnut veneer with pre-applied adhesive, used to finish exposed panel edges in woodworking projects.
American Veneer Walnut Edgebanding Preglued 13/16 Width has a stated width of 13/16 inch, giving coverage for typical 3/4 inch panels with extra material for trimming flush after bonding.
The preglued design on this walnut edgebanding means adhesive is applied at the factory to the back of the banding, so installation focuses on activating that glue and pressing the banding to the panel edge.
This walnut edgebanding, part of the Edgebanding, Wood category, is used to cover exposed edges on cabinets, shelves, and other panel components built with walnut-faced materials.
The AEWALN1316PG 13/16 walnut preglued edgeband is manufactured by Cedan Inc, providing a defined part that can be referenced by that manufacturer number.
The 13/16 inch size on this walnut preglued edgeband exceeds a 3/4 inch core slightly, enabling installers to trim back to a clean, flush edge after bonding.
American Veneer Walnut Edgebanding Preglued 13/16 Width provides walnut veneer edge treatment in a size matched to common 3/4 inch panel work, with adhesive already applied for straightforward use. The Cedan Inc identity and AEWALN1316PG part number let shops and serious DIY users call out this exact walnut edgebanding in project notes or material lists, supporting consistent results across cabinets, shelving, and furniture built over time. For projects that specify genuine wood edges in a walnut look, this preglued edgeband offers a defined, repeatable option to use throughout the job.
Sold In: 1 Roll