Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Blum Compact 30C soft close hinge is a concealed cabinet hinge designed for 3/8 inch overlay face-frame doors, so it lets you keep a clean exterior line while securely supporting the door on the frame. The hinge operates to 105 degrees of opening, giving enough swing for everyday cabinet access without overextending the door in tight runs. A nickel finish on the hinge provides a consistent, professional appearance across the run of cabinets. The hinge is classified as a concealed face frame hinge in the concealed cabinet hinges class, so it stays out of sight when the door is shut while still handling normal door loads. The screw-on mounting style gives a direct mechanical connection, which supports solid fastening into the frame material.
This Blum 3/8 overlay face frame hinge uses a screw-on connection, so it is fastened directly through the hinge parts into the cabinet members for a solid mechanical joint. The three dimensional cam adjustment built into the hinge lets the installer dial in side-to-side, height, and in-out positions with simple cam turns, which shortens alignment time after the door is hung. The 7/16 inch cup depth defines how deep the door bore must be, allowing door drilling jigs or CNC programs to be set to a single, repeatable depth for consistent seating of the hinge cup.
This Blum concealed cabinet hinge is intended for 3/8 inch overlay face-frame cabinet doors, so it suits common framed kitchen, bath, and utility cabinet constructions where the door overlays the frame by that amount. The compact configuration keeps the hinge within the face-frame style, which is useful where interior clearance is limited by roll-outs or shelves. With BLUMOTION integrated into the hinge cup, the hinge manages closing motion at the hinge point, which is helpful when cabinets are mounted near walls or appliances where softer closing reduces impact. The nickel finish supports use in visible hinge situations, such as glass-front or open-frame doors, where the interior hardware may be seen during normal use.
The three dimensional cam adjustment on this Blum Compact CLIP hinge screw-on design lets the installer fine-tune reveals without loosening mounting screws, which speeds up final fitting on multi-door banks. Vertical adjustment helps line up tops and bottoms of doors across a run, while horizontal adjustment trim gaps at stile edges. Depth adjustment allows doors to sit flush with adjacent surfaces, which supports even overlay and consistent interaction with adjacent hardware. The BLUMOTION integrated hinge cup slows the door as it closes, so door and frame surfaces are cushioned during contact, which is important for painted or delicate finishes. The overload safety feature built into the hinge protects the BLUMOTION system if a door is pushed or swung too hard, which supports ongoing performance in busy shops, homes, or commercial spaces where doors may be handled roughly.
This hinge is designed for 3/8 inch overlay face-frame cabinets, so it supports framed constructions where the door overlays the front frame by that amount.
The hinge opens to 105 degrees, which provides good access to cabinet interiors while helping keep the door within a controlled swing range.
BLUMOTION is integrated into the hinge cup, so it slows the door during the last part of closing to reduce slamming and protect door and frame surfaces.
The hinge offers three dimensional cam adjustment, allowing post-install vertical, horizontal, and depth corrections to align gaps and overlays.
The hinge uses a 7/16 inch cup depth, so door bores are machined to that depth for proper seating of the hinge cup.
The deactivation switch is intended for small or light doors, where turning off soft-close helps the door close fully under lower door weight.
This Blum BLUMOTION face frame hinge pairs 3/8 inch overlay geometry with soft-close control, so it addresses both fit and motion in one part. For face-frame projects needing concealed hardware, cam adjustment, and 105 degree opening, this hinge offers a focused, job-ready option.
Sold In: 1 Each
