Blum Compact Clip 30C Soft-Close BLUMOTION 3/8" Overlay Face-Frame Hinges Nickel, 105° Dowel - 30C258B06

Blum Compact 30C Soft-Close Hinge For 3/8 Overlay

Blum Compact 30C soft-close hinge is a concealed face frame cabinet hinge that provides a 3/8 inch overlay, so doors sit correctly over face frames on typical framed cabinetry. This hinge belongs to Blum's Compact 30C series, giving installers a consistent product identity across projects. The hinge uses BLUMOTION integrated into the hinge cup, so the soft-close function is built directly into the hinge body and keeps the closing action controlled. A 105 degree opening angle allows the door to swing open to a practical working range for access inside the cabinet. The hinge is nickel finished, which provides a neutral appearance at the hinge location when the door is opened. This model is identified by manufacturer part number 07112531 and Blum number 30C258B06, which helps match catalog specifications and reorder the same hinge for future work or repairs.

Key Working Details Of This Blum Hinge

• The hinge belongs to the concealed cabinet hinges product class, so it mounts inside the cabinet and keeps the hardware hidden when the door is closed, supporting a clean finished look on framed cabinetry.
• The 3/8 inch overlay face-frame design positions the door edge over the frame by 3/8 inch, which helps installers align replacement or new doors to match existing overlay layouts on face-frame runs.
• BLUMOTION integrated into the hinge cup provides soft-close action at the hinge itself, which means the closing performance stays tied to the hinge location instead of depending on external dampers.
• The hinge uses Blum's CLIP technology, allowing the hinge arm to be attached or removed from the mounting plate with the clip feature, which simplifies hanging doors and later adjustments in the shop or on site.
• A deactivation switch for small or light doors can be set at the hinge, letting installers tune soft-close force when door size or weight would otherwise close too slowly.
• The hinge provides three dimensional cam adjustment, which allows height, side, and depth adjustments at the hinge so door reveals can be fine-tuned after installation.

Mounting And Adjustment For Face-Frame Use

This hinge is described as a 3/8 inch overlay face-frame hinge, so it is intended for framed cabinets where the door must overlap the face frame by that amount. The hinge has a 7/16 inch cup depth, which informs the cup boring depth in the door during machining. A dowel version mounting design is specified, meaning the hinge uses dowels in the cup area, which suits production setups that bore matching dowel holes during door preparation. The 105 degree opening angle supports normal cabinet access without requiring unusual clearances in front of the cabinet line. Three dimensional cam adjustment built into the hinge gives fine-tuning ability after the doors are hung, so installers can dial in consistent gaps and flushness across multiple doors.

How This Compact Face-Frame Hinge Performs In Use

Soft-Close Compact Hinge For Framed Cabinets

This product is a concealed face frame hinge in the hinges category, so it is intended for cabinet doors that mount on face-frame cabinetry in woodworking and cabinetmaking projects. The 3/8 inch overlay specification defines how far the door overlaps the face frame, which is important when matching a run of doors on kitchen, bath, or shop cabinets. Because BLUMOTION is integrated into the hinge cup, every hinge position on the door contributes to the soft-close motion, helping the door settle against the frame in a controlled way. The 105 degree opening angle balances access with door swing, giving enough clearance to reach the interior while keeping the door within a typical working arc. The nickel finish provides a consistent appearance among hinges when doors are open, supporting a professional uniform look at install time.

Adjustment And Identification For Repeatable Results

Three dimensional cam adjustment on the hinge lets installers shift the door in height, side-to-side, and depth relative to the face frame, which helps correct minor drilling or frame variations without remaking parts. The deactivation switch for small or light doors lets the soft-close BLUMOTION function be reduced at the hinge, which is useful when a very light door needs a slightly faster close. The 7/16 inch cup depth spec gives a clear boring depth, helping machining setups repeat accurate hinge cup holes across production runs. The dowel hinge configuration suits drilling patterns that rely on dowel insertion in the cup area, which helps align and secure the hinge during door assembly. Identification by manufacturer part number 07112531 and number 30C258B06 in the product name supports consistent specification, ordering, and replacement of the same hinge in future cabinet projects.

Common Questions About This Blum Compact 30C Hinge

Selecting This Hinge For Face-Frame Projects

The Blum Compact 30C soft-close hinge with 3/8 inch overlay provides a concealed solution for face-frame cabinets where soft-close and precise adjustment are required. With 105 degree opening, BLUMOTION integrated into the hinge cup, three dimensional cam adjustment, deactivation switch for light doors, dowel hinge configuration, and 7/16 inch cup depth, it brings clear specifications to cabinet door work. Using manufacturer part number 07112531 and the 30C258B06 designation helps match this exact hinge when planning layouts, machining, or ordering for new or retrofit cabinet projects.