Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Blum Compact 30C soft-close hinge provides a concealed face-frame hinge solution that keeps doors closing quietly while preserving a clean exterior look. The hinge belongs to Blum's concealed cabinet hinges class, so the hardware stays hidden and the focus stays on the door surface. This model is designed for 1/2 inch overlay face-frame applications, allowing doors to partially cover the frame for a common kitchen and bath layout. The hinge uses a dowel design, tying the hinge cup solidly to the door material where a dowel bore is prepared. A 105 degree opening angle lets doors swing wide enough for everyday cabinet access without overextending into adjacent components in typical residential layouts. The nickel finish gives the hinge a consistent, neutral appearance that coordinates smoothly with most interior hardware finishes used around the cabinet run.
This Blum 1/2 overlay face frame hinge is tailored to cabinets built with a face frame front, so the hinge geometry matches that construction style. The 1/2 inch overlay specification means the door edge will sit so it covers roughly half an inch of the frame, giving consistent margins across a run of cabinets using the same layout. A dowel-mounted hinge cup connects into 7/16 inch deep bores in the door, so boring patterns and bit depth can be standardized around that value. The 105 degree opening angle defines the swing path, helping layout decisions around adjacent doors and nearby walls when planning a bank of cabinets or retrofitting existing installations.
This Blum concealed face frame hinge is intended for use where a face frame construction is present and a 1/2 inch overlay door design is specified, so the hinge geometry supports that building approach. In these cabinets, the hinge positions the door so it partially covers the frame while remaining fully supported during movement. The dowel hinge cup style engages the door material through bored holes, so once the bores match the 7/16 inch cup depth, installation and repeat runs remain consistent. Because BLUMOTION is integrated into the hinge cup, the soft-close function sits directly at the pivot point, supporting smooth closing even when the cabinet interior is loaded in normal household or shop environments. The nickel finish keeps the internal hardware visually neutral, which suits both new installations and replacements where interior appearance continuity matters.
The three dimensional cam adjustment built into this Blum CLIP BLUMOTION hinge allows fine-tuning in side, height, and depth directions, so door gaps can be dialed in after mounting without shifting hinge locations or re-boring. This adjustability supports precise reveals across multi-door runs and helps during replacements where frames or doors may have minor variations. The CLIP technology lets the hinge release from its mounting interface quickly, so doors can be taken off during finishing, interior work, or appliance access and then reattached in the same adjusted position. The overload safety feature in the hinge protects the soft-close mechanism during hard use, supporting consistent operation in busy kitchens or work areas. For very small or light doors, the deactivation switch at the hinge cup allows BLUMOTION to be switched off, so these lighter panels can shut fully without the damping acting against their lower weight.
The hinge is a concealed face frame hinge, so it is designed for cabinets built with a face frame front where the hinge mounts to that frame structure.
The Blum Compact 30C soft-close hinge is specified as a 1/2 inch overlay hinge, so the door is positioned to cover about half an inch of the face frame.
The hinge provides a 105 degree opening angle, giving a wide swing for everyday cabinet access while keeping the door movement within the designed arc.
BLUMOTION integrated into the hinge cup slows the door in the final part of closing, so the door meets the frame more gently and reduces impact wear over time.
The hinge offers three dimensional cam adjustment, so side, height, and depth positions can be tuned at the hinge to align door reveals across a cabinet run.
The deactivation switch is useful on small or light doors, letting soft-close be turned off so these lighter doors can shut completely under their lower weight.
The Blum 30C258B08 cabinet hinge pairs 1/2 inch overlay geometry with a concealed face frame design, so it fits common framed cabinet layouts while keeping hardware hidden. CLIP technology and three dimensional cam adjustment support fast setup, removal, and fine-tuning. BLUMOTION integrated into the hinge cup, with an optional deactivation switch and overload safety feature, supports smooth closing tailored to door size and everyday use. For projects calling for 7/16 inch cup depth and 105 degree opening in a nickel finish, this Blum Compact 30C soft-close hinge aligns well with those requirements.
Sold In: 1 Each
