Ashen edgebanding PVC is a PVC edge banding from Rehau, Inc. in an Ashen color that covers and protects raw panel edges, so finished pieces present a consistent, professional-looking perimeter. The .018 inch thickness gives a low-profile band that blends closely with typical laminated or coated panels, which helps projects maintain a flat visual line along doors, drawer fronts, and shelves. The 15/16 inch width matches common 3/4 inch panel builds with a bit of overhang, giving room to trim flush without exposing the core. The 600 FT length supplies enough material for multi-cabinet runs or repeated jobs in the same finish, which keeps color and sheen consistent across a full installation. The edge banding design fits standard edge-banding workflows, so shops can feed, trim, and finish this roll alongside other PVC offerings in the same setup.
This Ashen edgebanding is 15/16 inch wide, so it overhangs typical 3/4 inch panels just enough for trimming without leaving the substrate exposed. The .018 inch thickness works well where a slim edge is preferred, helping parts align smoothly at corners and door gaps. Being a PVC edge banding, it fits into edge-banding setups designed for PVC material, so shops can run it through standard equipment in the same category. The 600 FT length on a single roll reduces material changeovers during a run, which supports continuous edging on casework, doors, and drawer fronts in the Ashen finish.
The Ashen edgebanding, PVC .018 inch thick and 15/16 inch wide, is designed as edge banding for covering panel edges in cabinet and furniture work, so it suits projects where exposed cores need a finished look. The width gives coverage on standard cabinet-grade sheet goods, which is useful when finishing vertical cabinet sides, shelves, and face components in a unified Ashen tone. With 600 FT on the roll, a shop can edge a run of doors and drawer fronts in sequence, which helps keep the color and surface character consistent from piece to piece in a kitchen or commercial installation. As a product in the Edgebanding & Surfacing category, it fits into workflows where panel faces and edges are coordinated, so designers and builders can match edge treatment to surrounding surfaces in the same project.
The .018 inch thickness of this PVC edge banding keeps the edge relatively thin, which helps doors and fronts align more predictably when gapped, reducing visual step differences at meeting edges. The 15/16 inch width gives a repeatable amount of overhang to trim, so operators can dial in cutters for flush results without risking short coverage along any run. Because the product is defined specifically as Ashen Edgebanding, PVC .018 inch Thick, 15/16 inch Width x 600 FT, installers can call out the full description or the 301574-457 part number on drawings and purchase lists, helping future replacements match existing work accurately. The fact that it is a PVC edge banding in a single, continuous 600 FT length also supports batch processing, as shops can edge many parts in one session with consistent feed behavior and material response.
The Ashen edgebanding is .018 inch thick and 15/16 inch wide, which lets it cover standard 3/4 inch panel edges with enough material to trim cleanly to a flush, finished edge.
The Rehau Ashen PVC edgebanding roll is 600 FT long, giving shops enough length to run multiple cabinets or repeated jobs in the same finish without frequent roll changes.
The Ashen edge banding is PVC, so it fits processes and equipment set up for PVC edge banding in cabinet and furniture production environments.
The .018 inch thickness creates a slim edge profile that covers the substrate while helping doors, drawer fronts, and panels maintain smooth, aligned meeting lines.
The 15/16 inch width provides slight overhang on common 3/4 inch panels, giving room to trim back to a clean, fully covered edge without exposing the core.
This specific Ashen PVC edgebanding can be referenced by its full description or by manufacturer part number 301574-457 for ordering and documentation.
The Ashen Edgebanding, PVC .018 inch Thick, 15/16 inch Width x 600 FT from Rehau, Inc. gives a defined color, width, thickness, and length for planning cabinet and furniture edging. Using this single 600 FT PVC roll in Ashen allows a shop to carry one consistent edge across related components, simplifying layout and part labeling. For projects calling for an Ashen PVC edge on standard panel builds, this edge banding provides a clear, repeatable choice.
Sold In: 1 Roll