PVC Nubian Brown edgebanding from Rehau, Inc. is a PVC edge banding designed to cover and finish exposed panel edges, so cabinets, furniture parts, and casework present a uniform Nubian Brown edge instead of raw substrate. The 15/16 inch width gives coverage across standard 3/4 inch panels with room for trimming, which helps installers flush the banding without risking a starved edge. The .018 inch thickness creates a slim, low-profile edge, which suits jobs where a subtle transition from face to edge is preferred. The 600 ft length supports longer production runs or multiple installations, reducing changeovers during cabinet or fixture builds. The Nubian Brown color provides a consistent brown tone along the full 600 ft, which supports visual continuity when edging multiple parts on the same project. The PVC construction provides a uniform edge material for routing and trimming workflows.
This Rehau, Inc. PVC edge banding in Nubian Brown pairs a 15/16 inch width with .018 inch thickness, which aligns well with standard edge-banding equipment that applies narrow PVC strips and then trims them flush. The extra width beyond a 3/4 inch panel edge allows installers to position the strip confidently and then use edge trimmers or routers to bring the banding down to the panel size. Because the material is PVC, it behaves predictably when cut, routed, or trimmed, which supports repeatable results from part to part. The 600 ft roll length also supports setting up an edgebanding station once and running many cabinet parts in sequence, helping maintain a steady installation rhythm in the shop or on detailed builds.
This PVC Nubian Brown .018 inch thick, 15/16 inch wide edge banding suits cabinet, furniture, and casework projects where exposed board edges need a finished brown appearance. The Nubian Brown color extends across the full 600 ft, so door fronts, shelves, and side panels can be edged from the same roll for a uniform look. Because the banding belongs to the Edge Banding product class, it serves directly as the finishing strip over raw panel edges in woodworking assemblies. In shops that produce multiple units, the 600 ft length supports edging many components without changing rolls, which helps keep color and material consistent from the first piece to the last on the job.
The .018 inch thickness gives the Rehau, Inc. PVC banding a low profile, which helps keep routed edges close to the plane of the panel surface and supports a smooth feel along doors and cabinet frames. At 15/16 inch width, the strip provides coverage beyond common panel thicknesses, allowing for slight variations in cut size while still trimming back to a clean line. The uniform PVC construction means the banding responds consistently to edge trimming tools, which helps installers repeat the same setup across multiple runs. With a total length of 600 ft, this roll supports planning an edgebanding sequence that keeps material changes to a minimum, which is useful when matching Nubian Brown edges across cabinets, closets, or furniture projects.
This PVC Nubian Brown edge banding measures 15/16 inch in width and .018 inch in thickness, which suits covering typical panel edges with enough excess for trimming to a flush finish.
This Rehau, Inc. Nubian Brown PVC edgebanding roll is 600 ft long, which supports edging many cabinet or furniture parts from a single continuous length.
The 301574-593 edge banding is made from PVC, providing a uniform plastic material that works well with common edge trimming and routing processes in woodworking shops.
This PVC Nubian Brown edge banding is used on exposed panel edges in cabinets, furniture, and casework to replace visible raw edges with a consistent brown finish.
The .018 inch thickness creates a slim edge layer, helping produce a subtle transition at the panel perimeter while still covering the substrate.
The 15/16 inch width offers coverage beyond common panel thicknesses, giving room to align the banding and trim both sides back to a clean, centered edge.
This Rehau, Inc. PVC Nubian Brown .018 inch thick, 15/16 inch wide x 600 ft edge banding from Wurth Baer Supply provides a defined size, color, and material for finishing panel edges. When a project calls for a Nubian Brown edge on cabinets, furniture, or casework, these dimensions and the continuous 600 ft length support consistent edging across multiple components. For jobs that rely on narrow PVC strips and trimming equipment, this edge banding offers a practical option aligned to common woodworking workflows.
Sold In: 1 Roll