PVC antique white edgebanding gives you a PVC edge treatment in an antique white color, so you can finish panel edges to coordinate with antique white surfaces in cabinet and furniture projects. The .018 inch thickness provides a light, workable edge that handles typical panel edging without adding bulk, making it suitable where a slim band is preferred. The 15/16 inch width covers most standard 3/4 inch panels with a bit of overhang for trimming, which supports a flush, professional-looking edge after machining. The matte surface gives the antique white color a low-sheen appearance, helping the edge melt visually into similar matte antique white faces. The 600 ft length is sized for production or multi-job runs, reducing changeovers during cabinet, casework, or fixture runs that use antique white panels.
The .018 inch thick PVC profile works well where a thinner band is desired, because it shapes and trims quickly while leaving a clean edge line on cabinet and furniture parts. At 15/16 inch wide, this antique white matte banding is sized to cover the face of common panel thicknesses with slight overhang, which allows standard trimming operations to dial in a flush edge. The antique white color and matte finish pair naturally with antique white panel faces, so edges read as part of the surface instead of a contrasting strip. With 600 ft available, shops can edge multiple units or a full project in one color and finish, maintaining visual consistency from the first panel to the last.
This edgebanding, categorized as edge banding in the edgebanding and surfacing group, is suited to cabinet and furniture components that call for antique white edges. The PVC material matches typical PVC-based layouts in casework shops, so it integrates smoothly into workflows using PVC fronts or laminate systems. The antique white tone supports projects built around light, classic color schemes where a bright white would be too stark, allowing the edge to complement doors, drawer fronts, or carcass parts finished in antique white. Because the banding is 15/16 inch wide, it aligns with use on standard thickness panels commonly used for cabinet sides, tops, and shelves.
The .018 inch thickness contributes to predictable trimming because the band remains thin enough to cut and scrape efficiently, which helps maintain a straight edge profile along long cabinet parts. The matte finish reduces reflected light at the joint between face and edge, so slight variances at the seam are visually softened when panels are installed in kitchens, offices, or built-ins. The 600 ft length lets production runs stay on a single color and specification, keeping material changes off the critical path during cutting and edging sequences. Identified by manufacturer part number 301574-642 from Rehau, Inc., this PVC antique white matte banding gives shops a repeatable reference when reordering for future work or matching existing antique white installations.
This edgebanding is made from PVC, which provides a consistent synthetic edge material that runs well on standard edgebanding equipment in cabinet and furniture shops.
The edgebanding is .018 inch thick, giving a thin profile that trims and scrapes easily while leaving a defined but subtle edge on finished components.
The 15/16 inch width suits edging typical panel thicknesses, providing coverage with extra width for trimming to a flush edge on cabinet and furniture parts.
The antique white matte finish offers a low-sheen, antique white edge that visually aligns with similar matte antique white faces on cabinets or furniture.
Projects using antique white cabinet or furniture surfaces benefit from this banding because its antique white color helps create coordinated, continuous edges.
The 600 ft length supports extended runs, allowing multiple cabinets, shelves, or panels to be edged in the same antique white PVC without frequent roll changes.
This Rehau, Inc. PVC antique white matte .018 inch thick, 15/16 inch width x 600 ft edgebanding gives shops a defined specification for antique white edges on cabinets and furniture. The combination of PVC material, antique white matte finish, and production-length roll supports consistent edging across full projects. For work centered on antique white surfaces, this edge banding helps tie panel faces and edges together in a single, repeatable specification.
Sold In: 1 Roll