PVC Nepal Tek edgebanding from Rehau is a PVC edge banding strip designed to finish exposed panel edges on woodworking projects. The .018 inch thickness provides a slim edge profile that follows the panel without adding bulk, which helps maintain overall dimensional accuracy on cabinets and casework. The 15/16 inch width is sized to cover standard panel thicknesses with a bit of overhang for trimming, so edges can be flushed for a straight, consistent line. The 600 foot length on a single roll supports longer production runs or multiple jobs, reducing product changeout during cutting and application. Being a PVC material, this edgebanding matches the PVC edgebanding and surfacing category, aligning with common shop processes used for edge finishing. The Nepal Tek description identifies the specific design reference for matching to corresponding surfaces where that detail is required.
The .018 inch thickness of this Rehau PVC edgebanding works as a thin facing layer, so adhesive lines and substrate transitions remain subtle after pressing and trimming. Its 15/16 inch width spans the panel edge with enough extra material for final trim passes, which lets installers cut back to a flush edge rather than chasing alignment during placement. The 600 foot length offers extended run capacity from one roll, which supports continuous feeding on edgebanding setups or consistent hand-application sequences without frequent roll changes.
This Rehau PVC edgebanding is specified as edge banding for woodworking panels, which positions it for use on cabinet parts, shelves, and similar components where raw edges need a finished surface. The 15/16 inch width covers common board thicknesses with room for trimming, so it can be applied slightly proud and then cut back for a straight, square edge line along doors, sides, or dividers. The .018 inch thickness keeps the edge layer relatively thin, which supports a smooth transition between face and edge and helps the finished piece maintain its intended proportions. Classified under edgebanding and surfacing, this product aligns with other surfacing materials in the shop, so it can visually coordinate with matching Nepal Tek surfaces where that pattern or color is part of the design intent.
The consistent .018 inch thickness across the roll supports uniform trimming behavior from piece to piece, which helps keep adjustments stable on edge-processing equipment once it is dialed in. With 600 feet available on one roll, the same material can run across many parts, reducing the need to reset equipment for material changes during a project. The 15/16 inch width leaves a workable margin beyond typical core thicknesses, so installers can focus on maintaining straight feed and reliable adhesion rather than fighting tight edge coverage. The manufacturer part number 301674-282 clearly identifies this exact Nepal Tek strip, which simplifies matching when replacement or additional length is needed for future work that must visually align with earlier jobs.
This PVC Nepal Tek edgebanding is 15/16 inch wide, giving coverage over typical panel edges with extra margin that can be trimmed back for a flush finished edge.
The Rehau PVC edgebanding strip is .018 inch thick, providing a slim edge layer that helps maintain panel dimensions while still giving a defined finished edge surface.
This product provides 600 feet of PVC edgebanding, allowing long runs or multiple projects to be completed from a single roll without frequent material changes.
This Nepal Tek edge banding is made from PVC, aligning it with PVC edgebanding and surfacing workflows commonly used in woodworking shops.
This 301674-282 edgebanding is manufactured by Rehau, Inc., which identifies the specific source and supports accurate selection or reordering by part number.
This edge banding is classified as PVC edgebanding and surfacing material for woodworking, fitting applications where exposed panel edges need a finished PVC surface.
This Rehau PVC Nepal Tek edgebanding combines .018 inch thickness, 15/16 inch width, and a 600 foot roll length to support continuous edge finishing on woodworking panels. For projects that call for Nepal Tek design coordination and consistent PVC edge treatment, this 301674-282 strip offers a defined, repeatable option for covering exposed edges.
Sold In: 1 Roll