PVC edgebanding steel mesh smooth describes a PVC edge banding strip in a steel mesh color with a smooth surface that is designed to finish exposed board edges, so cabinet and panel projects get a uniform, finished look. The 15/16 inch width covers standard panel thicknesses with a small margin, which helps installers trim flush without exposing the core. The .018 inch thickness keeps the banding low-profile, which suits projects where a subtle edge is preferred. A 600 FT length on one product supports longer runs and repeat work on the same job, which reduces changeover time between pieces. Classified as edge banding in the edgebanding and surfacing category, this material fits directly into workflows where PVC banding is already specified. The Rehau, Inc. brand designation and manufacturer part number 301674-868 identify the exact color and surface combination, which supports consistent results across multiple installations.
The 15/16 inch width works over common panel thicknesses with some overhang, so installers can apply the banding and then trim back to a precise flush edge. The .018 inch thickness keeps the banding relatively thin, which reduces the step between the face of the panel and the edge, supporting a more seamless transition. Being classified under edgebanding, PVC signals that this material is intended to be used as PVC edge banding, so it fits into established edgebanding processes in cabinet and furniture production. The 600 FT length means a single roll is suited to runs where the same edge detail repeats, helping maintain color and finish continuity from part to part.
This PVC edge banding in a steel mesh description is suited for projects where the edge color needs to coordinate with that specific tone, so casework, cabinets, or fixtures can carry the same visual theme across all exposed edges. The smooth surface works well in installations where hands frequently contact the edge, because a level, even surface supports a consistent feel along doors, drawer fronts, and shelving. As an edge banding product within the edgebanding and surfacing group, it aligns with workflows where panels are edged before assembly, so parts move efficiently from edgebanding to drilling and final build. The 600 FT roll length allows shops to set up for a run and stay on the same material throughout the job, which supports visual consistency from the first part to the last in that run.
The 15/16 inch width gives a modest amount of overhang on typical panel thicknesses, which makes it easier to apply the banding without perfect edge alignment, then trim back to a clean, straight edge using standard edgebanding tools. The .018 inch thickness keeps the strip lightweight and modest in profile, which supports neat trimming at corners and reduces the edge step that could otherwise catch light or touch. With 600 FT available on one product, production teams can schedule several pieces, cabinets, or casework sections using the same edgebanding, which supports repeatability in color and gloss level across the job. The clear identification by Rehau, Inc. and the part number 301674-868 ties each roll to the same specification, so repeat orders keep matching existing work that used this same PVC edge banding.
This PVC edgebanding is 15/16 inch wide, .018 inch thick, and supplied in a 600 FT length, which supports long runs and provides trimming room on typical panel edges.
The .018 inch thickness creates a slim edge profile, which helps the banding sit close to the panel face and supports a subtle, less pronounced transition at the edge.
Steel mesh smooth refers to a specific steel mesh color with a smooth surface, which sets the visual appearance and feel of the finished edge on cabinets and panels.
The 600 FT length allows multiple parts or cabinets to be edged from one product, which supports consistent color and surface and reduces material changeovers during production.
This PVC edge banding is produced by Rehau, Inc., which identifies the specific source and helps match this material to existing work that used the same brand.
The 301674-868 manufacturer part number designates this exact combination of PVC material, steel mesh description, smooth finish, and 15/16 inch by .018 inch by 600 FT size.
This Rehau PVC edge banding with a steel mesh smooth description, 15/16 inch width, .018 inch thickness, and 600 FT length offers a defined combination of size, color, and surface. When projects call for this specific edge detail, selecting this 301674-868 PVC edgebanding allows shops to keep dimensions and appearance aligned across cabinets, casework, and panel runs that rely on this configuration.
Sold In: 1 Roll