PVC satin stainless edgebanding from Rehau, Inc. finishes exposed panel edges with a satin stainless appearance over a PVC base, so cabinet and furniture projects gain a defined edge detail using a consistent color and material. The 15/16 inch width covers standard panel thicknesses with a small overhang, giving room to trim and flush the edge for a straight finished line. The .018 inch thickness provides a thin PVC edge profile, which creates a low-build look along the edge while still covering the substrate. The 600 FT length supplies a continuous run of edgebanding, which supports multiple cabinets or longer production runs without frequent coil changes. As a PVC product in a satin stainless look, this edge banding pairs PVC construction with a metallic-style tone, allowing designers and installers to match or coordinate with similar satin stainless surfaces in a job.
This Rehau PVC satin stainless .018 inch thick edgebanding gives installers a defined combination of width, thickness, and material for edge finishing. The 15/16 inch width provides coverage for common board thicknesses used in cabinetry and surfacing, leaving material to trim back for a clean edge line. The .018 inch thickness sets expectations for how the PVC behaves during application and trimming, so fabricators can match it with their preferred edgebanding equipment and cutting methods. Being a PVC product in the Edgebanding, PVC category, it aligns with typical PVC edge banding workflows on shop equipment designed for this material type. The 600 FT roll length supports extended production or multiple projects from the same roll, which helps maintain uniform color and finish along every treated edge.
This PVC satin stainless .018 inch thick edgebanding is part of the Edgebanding & Surfacing category, positioning it for use on exposed edges of panels in cabinetry, furniture, and related woodworking projects. The satin stainless description signals a stainless-style edge appearance, which works where designers specify a satin stainless tone on doors, drawer fronts, or casework edges. With a 15/16 inch width, it pairs with sheet goods whose finished thickness sits within that coverage range, making it suitable for many standard furniture and cabinet panel builds. The PVC construction places it in workflows where PVC is already used for surfacing or trim, so shops can keep material consistency across components. The 600 FT length supports both one-off fabrication and repeated production runs from the same edgebanding specification.
The defined 15/16 inch width and .018 inch thickness help fabricators predict the trimming and finishing steps needed for clean edges, so machines and handheld tools can be set for a repeatable process. A single 600 FT roll provides a continuous supply of the same satin stainless PVC, which supports visual uniformity when multiple cabinets, panels, or rooms are finished from this product. The specific Rehau, Inc. branding and manufacturer part number 301674-885 give shops a precise reference when reordering or matching existing installations, helping maintain the same edge profile and appearance on future work. Being clearly listed in the Edgebanding, PVC product class ties this item into established PVC edge banding methods, so installers can integrate it into current edgebanding stations without changing the basic workflow.
This PVC satin stainless edgebanding is 15/16 inch wide, giving coverage across common panel thicknesses while leaving enough material for trimming to a flush finished edge.
The Rehau PVC satin stainless edgebanding is .018 inch thick, providing a thin edge profile that still fully covers exposed substrate edges during cabinet or furniture fabrication.
This edge banding is supplied in a 600 FT length, allowing extended runs of cabinetry or casework edges to be finished from a single continuous product reference.
The edgebanding is PVC with a satin stainless description, pairing PVC construction with a satin stainless-style look along exposed panel edges.
This 15/16 x .018 PVC satin stainless edgebanding is manufactured by Rehau, Inc., giving shops a defined brand and source for matching future work.
The manufacturer part number is 301674-885, which helps installers and buyers reorder the same satin stainless PVC edge banding for consistent results.
This Edgebanding, PVC satin stainless .018 inch thick, 15/16 inch width x 600 FT product from Rehau, Inc. offers a defined size, material, and appearance profile for edge finishing. The combination of width, thin PVC construction, and satin stainless description makes this edge banding a clear fit where a stainless-style edge is desired on cabinetry or surfacing projects. With a specific manufacturer part number 301674-885 and a substantial 600 FT length, it supports both immediate project needs and consistent future matching. Use this PVC satin stainless edgebanding whenever a controlled satin stainless look and known PVC edge banding dimensions are required along exposed panel edges.
Sold In: 1 Roll