Edgebanding PVC Amber Maple identifies this Rehau, Inc. edge banding as a PVC Amber Maple product, so it is ready to finish exposed edges to match Amber Maple surfaces on cabinetry and casework. The .018 inch thick PVC construction provides a thin edging layer, which keeps the edge profile tight while still covering the substrate. The 15/16 inch width gives coverage across standard panel edges in this size range, helping the material span the face without leaving raw material exposed. A 600 FT length provides a continuous supply from a single roll, which supports longer runs on jobs without frequent roll changes. The edge banding is identified as PVC Amber Maple in both the product name and SAP description, tying the color and material together for repeat ordering on future projects that need the same match.
The 15/16 inch width on this edge banding sets it up for use on panel edges cut to work with that width, giving a bit of tolerance for trimming while still covering the face. With a .018 inch thickness, the PVC material adds only a small build at the edge, which is useful when the goal is a subtle transition from face to edge. The product is identified as Edgebanding, PVC Amber Maple in both the product name and web description, so it is clearly positioned for finishing exposed edges rather than broad surfaces. The 600 FT length supports a continuous application workflow, keeping the same color and material running across entire cabinet or fixture projects that are planned around Amber Maple components.
This edge banding is described as Edgebanding, PVC Amber Maple .018 inch Thick, 15/16 inch Width x 600 FT, which defines a narrow, continuous edging solution for cabinetry, casework, or furniture built around Amber Maple finishes. Being in the Edge Banding product class and the Edgebanding, PVC category places it specifically as a finishing material for panel edges rather than a structural component, so it functions as the visible edge layer over a substrate. The Amber Maple naming in both the product name and SAP Description helps align this banding with panels or laminates identified with the same color term, which supports a consistent appearance across doors, drawer fronts, and case edges on coordinated jobs. Because it is supplied in a 600 FT length, a shop can plan full runs of matching edges off a single part, which streamlines job planning when multiple cabinets or fixtures share the same Amber Maple finish. The Rehau, Inc. brand links the part to a single manufacturer, which helps shops that catalog edge materials by brand and color name for repeat builds.
The .018 inch thickness defines how lightly this PVC edge banding sits on the panel, which matters when trimming and flushing operations target a near-seamless edge between the banding and the face material. A thinner edgeband like this can help keep the edge transition subtle, which is often desirable when matching Amber Maple faces where the goal is a clean, understated joint. The 15/16 inch width creates a predictable coverage dimension, letting fabricators size panel edges with this width in mind so that the banding can be applied and then trimmed back to the face for a uniform reveal. The 600 FT length gives a single continuous source of Amber Maple edging, which supports repetitive setups on edgebanders or manual application without changing part numbers mid-job. The Manufacturer Part # 301674-937 provides a precise identifier that ties all these dimensions and the Amber Maple color together, so the same setup and visual result can be repeated when the project calls for matching replacements or future additions.
This Amber Maple edge banding is described as PVC in the product name and category, so it uses PVC material to cover exposed panel edges in Amber Maple projects.
The Rehau Amber Maple edgebanding has a 15/16 inch width, giving enough coverage to span panel edges sized for this banding and then be trimmed flush to the face material.
The .018 inch thickness indicates a relatively thin PVC edge layer, which helps create a light, low-profile edge that trims easily and keeps the transition to the panel face subtle.
The 600 FT length provides a long, continuous run of Amber Maple PVC edging, supporting multiple cabinets or larger casework projects under a single part number.
Part number 301674-937 identifies this specific Rehau PVC Amber Maple edge banding, tying together the .018 inch thickness, 15/16 inch width, 600 FT length, and color.
This product is listed under Edgebanding & Surfacing in the Edgebanding, PVC category and Edge Banding product class, positioning it as a PVC edging solution for woodworking projects.
This Edgebanding, PVC Amber Maple .018 inch Thick, 15/16 inch Width x 600 FT from Rehau, Inc. provides a defined combination of material, color, thickness, width, and roll length for edge finishing. The Amber Maple identification across the product name, web description, and SAP Description ties this part directly to that appearance, which is useful when matching to Amber Maple faces and recording materials for repeat projects. By using the 301674-937 part number, shops can standardize on this exact PVC edge banding for cabinets, casework, or fixtures planned around Amber Maple surfaces, keeping edge details consistent from job to job.
Sold In: 1 Roll