Neutral White Edgebanding, PVC 3mm Thick, 1-5/16" Width x 300 FT

Neutral White PVC Edgebanding For Clean Panel Edges

Neutral White Edgebanding PVC 3mm gives you a defined neutral white edge on casework and panels, so exposed board edges turn into a finished surface that reads as part of the panel instead of raw core. This product is a PVC edge banding from Rehau, Inc., so the material is designed as a surfacing solution for furniture and cabinet components where you want a consistent PVC edge. The 3mm thick PVC construction provides a substantial edge profile, which helps cover the substrate edge and creates a solid visual line along doors, drawer fronts, and shelves. The 1-5/16 inch width matches common panel thicknesses where you want slight overhang for trimming, which supports a precise flush edge once the band is processed. A 300 FT length allows longer continuous runs, which reduces splice points along cabinet edges and helps keep the finished edge visually uniform.

Key Neutral White PVC Edgebanding Advantages

• The Neutral White Edgebanding color creates a neutral white edge, which helps panels and components present a coordinated appearance wherever the core would otherwise be visible.
• The PVC 3mm thick construction forms a robust edge profile, which helps protect the board edge while providing enough material for trimming and profiling passes during fabrication.
• The 1-5/16 inch width is sized for typical panel applications, which gives you working room to align and trim the band flush to the face without exposing the substrate.
• The 300 FT length is suited to production or multi-cabinet runs, which lets you move from cabinet to cabinet without frequent coil changes during edge banding operations.
• The Rehau, Inc. branding identifies this as a Rehau PVC edgebanding, which aligns the product with a dedicated edge banding and surfacing manufacturer for panel finishing work.

Installation Fit For 1-5/16 Inch Edge Band Runs

This Neutral White Edgebanding, PVC 3mm Thick, 1-5/16 inch Width x 300 FT is sized to work along panel edges where you need slight excess for trimming to a clean line. The 1-5/16 inch width provides enough coverage across the face and back of the board edge so the trimmed result hides the core along the full thickness. The 3mm thickness of the PVC edge banding establishes a noticeable edge detail, which allows edge banding tools and trimmers to track along the edge without deflecting easily. At 300 FT per coil length, the material supports extended installation runs around cabinet boxes, shelving, or furniture components, which helps maintain color and thickness consistency across an entire project.

Using Neutral White Edge Banding In Cabinet Work

Where This 3mm PVC Edgebanding Is Applied

This Neutral White Edgebanding is an edge banding, PVC product in the edgebanding and surfacing category, so it is intended for finishing exposed panel edges in woodworking and cabinet projects. The 1-5/16 inch width allows use on panels sized around that edge dimension where the band will be trimmed back to the faces, so doors, side panels, shelves, and dividers can all carry the same neutral white PVC edge. Because the length is 300 FT, one coil can serve multiple cabinet bodies or a run of casework, which supports using a single neutral white tone throughout a room or project. The edge banding format works as part of a surfacing workflow, where the panel face material is complemented by a neutral white edge treatment around all visible sides.

Why Thickness, Width, And Length Support Results

The 3mm thick PVC construction of this edge banding gives you material depth for a defined edge, which helps the profile read as intentional rather than a thin film over the substrate. That thickness also allows trimming tools to remove slight overhang while keeping a straight, chip-resistant edge along the panel. The 1-5/16 inch width creates extra banding beyond the panel faces, which lets you align the material confidently before trimming both sides back to flush without risking exposure of the board edge. With 300 FT available, installers and shop crews can run continuous stretches along tall cabinet sides or long shelving without changing coils mid-run, which helps maintain an even neutral white color and a consistent PVC edge thickness from piece to piece. The Rehau, Inc. identity and manufacturer part number 301784-002 give you a defined reference when matching future jobs to the same neutral white PVC edge banding.

Common Questions About Neutral White PVC Edgebanding

Select Neutral White Edgebanding For Consistent Panel Edges

The Neutral White Edgebanding, PVC 3mm Thick, 1-5/16 inch Width x 300 FT from Rehau, Inc. serves projects that call for a neutral white PVC edge along exposed board edges. The 3mm thickness, 1-5/16 inch width, and 300 FT length work together to support efficient casework and cabinet runs that keep the edge color and profile consistent from part to part. For panel-based construction where exposed edges need to match the design intent, this edge banding format gives shops and installers a defined neutral white PVC option.