Edgebanding PVC Noce Vettore 1mm identifies this Rehau, Inc. edge banding as a PVC material in a Noce Vettore design, so it finishes exposed panel edges with a coordinated look in that specific decor. The 1mm thick construction creates a substantial edge profile that helps visually match typical 3/4 inch panels while covering core material reliably. The 15/16 inch width gives enough coverage for standard panel thickness with a small working margin, which helps you trim flush without exposing substrate. The 600 FT length means a single roll serves larger cabinet, furniture, or fixture runs before a changeover, which supports continuous work on repetitive projects. As a product in the Edge Banding category, it is intended for covering raw edges, so it rounds out laminate or melamine projects with a finished appearance.
This Edgebanding PVC Noce Vettore 1mm product is designed as a 15/16 inch wide strip, so it fits common panel thicknesses used in cabinet and casework construction with just enough overhang for trimming. The 1mm thickness behaves like a standard workhorse profile, so it suits straight-line edgebanders and manual application methods typically used in woodworking environments. Being part of the Edgebanding, PVC category means it is intended for bonding to compatible panel edges, giving those panels a decorative Noce Vettore finish. The 600 FT length on the roll supports both shop production and serious DIY projects that require consistent material across multiple cabinets or furniture pieces.
This PVC edge banding in the Noce Vettore design is identified by the Web Description and SAP Description as a 15/16 inch by 1mm product, so it aligns with panel projects that use Noce Vettore surfaces and need matching edges. As an item in the Edgebanding, PVC category from Rehau, Inc., it is suited to cabinet, furniture, and other woodworking applications where exposed sheet-good edges need a finished look. The Manufacturer Part # 301799-346 ties this exact color and size together, which helps you reorder the same Noce Vettore edge for repeat jobs or later touch-ups on installed work. The edge banding format allows you to run continuous lengths along cabinet sides, doors, or shelving, so seams stay minimal and visual flow matches the main surfaces. Because the banding is supplied as a 600 FT roll, it supports production-style layouts, letting you run a sequence of components for a full room or bank of cabinets using one consistent Noce Vettore source.
The defined 1mm thickness of this Rehau, Inc. PVC edge banding gives your trimmers and routers a predictable amount of material to work with, which helps you dial in clean, repeatable cuts from part to part. Its 15/16 inch width provides enough overhang beyond typical panel thickness to accept minor panel variation while still trimming back to a crisp edge without revealing the panel core. The 600 FT length reduces mid-job material changes, so you maintain the same Noce Vettore tone and pattern across all doors, drawer fronts, and cabinet sides in a run. Being clearly categorized as Edge Banding and identified as PVC in both the SAP Description and Web Description confirms its role as a decorative edge solution, so crews can match it with appropriate panel finishes during project planning. The specific Manufacturer Part # 301799-346 simplifies job documentation and shop notes, letting you specify the exact Noce Vettore edge required for consistent results on repeat builds.
This Rehau, Inc. edge banding is 15/16 inch wide and 1mm thick, providing coverage for common panel thickness with enough material for clean trimming and a defined finished edge.
This Noce Vettore PVC edge banding roll is 600 FT long, supporting extended runs of cabinets or furniture components using the same decor across an entire project.
The Noce Vettore 1mm edge banding is PVC, giving a consistent machinable edge surface that works well with typical woodworking edge-banding equipment and trimming tools.
The 1mm thickness creates a substantial yet controlled edge profile, helping the finished edge visually match standard cabinet panels without looking overly heavy or undersized.
The 301799-346 Manufacturer Part # identifies this specific combination of Noce Vettore decor, 1mm thickness, 15/16 inch width, and 600 FT length for accurate specification and reordering.
This PVC edge banding is in the Edgebanding & Surfacing category, making it suited to cabinet, furniture, and similar woodworking projects needing a Noce Vettore finished edge.
This Edgebanding PVC Noce Vettore 1mm product from Rehau, Inc. combines a 1mm thickness, 15/16 inch width, and 600 FT length to support both shop production and serious DIY work. The Manufacturer Part # 301799-346 clearly defines the Noce Vettore decor and dimensions, so it aligns with projects built around that specific look. Choosing this edge banding lets you carry the same Noce Vettore design across exposed panel edges, helping your cabinets or furniture present as a coordinated, finished system.
Sold In: 1 Roll