Edgebanding PVC Khaki Brown Flex 3mm identifies this Rehau, Inc. PVC edge banding as a khaki brown flexible strip designed to finish exposed board edges, so you can take raw edges on cabinets or panels to a clean, consistent appearance. The 3mm thick construction provides a substantial edge profile, helping create a defined, solid look along worktops or case good components. A 1-5/16 inch width matches common panel thickness plus overhang, so you have enough material to cover the edge before trimming flush in the shop. The 300 FT length supplies a continuous run for multiple cabinets or longer parts, which helps reduce seam locations during production runs. As PVC material, this edge banding works well within the edgebanding and surfacing category, supporting typical woodworking environments where a practical, uniform edge treatment is needed.
The 1-5/16 inch width on this Rehau PVC edge banding gives extra material beyond most panel thicknesses, so installers can apply it with standard edge-banding equipment and then trim both sides flush for a clean line. The 3mm thick design sets the profile depth, which matters when matching other 3mm programs or when routing corners, since tools can be set to that thickness for repeatable results. With a 300 FT length, shops can feed automated or manual banders over longer production sequences, which helps maintain consistent settings across an entire job. As PVC edge banding in the Edgebanding, PVC category, it fits into typical edgebanding workflows on woodworking projects that specify PVC strips for finishing exposed edges.
This Rehau, Inc. edge banding is identified as Edgebanding, PVC, Khaki Brown Flex 3mm Thick, 1-5/16 inch Width x 300 FT, which positions it for finishing cabinet, furniture, and panel edges that call for a khaki brown PVC edge. The khaki brown tone helps align with similarly colored boards or laminates in a project line, so door fronts, finished ends, and shelves present a uniform appearance. The 3mm thick edge suits applications where a more substantial edge is preferred, such as commercial casework or higher-wear panel edges. With 300 FT per roll, this product supports shop builds that require multiple identical case parts or a series of matching units, enabling long edge runs across sides, dividers, and horizontal members without frequent roll changes. As edge banding within the Edgebanding & Surfacing category, it integrates into woodworking projects that depend on PVC edges for a finished, consistent perimeter.
The 1-5/16 inch width gives a predictable working margin during edge application, allowing installers to center the PVC strip over typical panel thicknesses and rely on trim equipment to remove the overhang, which helps reduce edge wander and exposed core areas. The 3mm thickness sets a standard for cutter and trimmer setups, so once machines are dialed in for 3mm PVC edge banding, this product can run with consistent pressure and trimming settings across a job. The continuous 300 FT length provides enough material to maintain the same feed and heat settings over many parts, which supports uniform edge quality from the first panel to the last. The flexible PVC nature described as Flex works with standard edge-banding workflows, helping the material track along straight cabinet edges and typical panel layouts without changing basic handling routines.
This edge banding is 1-5/16 inch wide, 3mm thick, and supplied in a 300 FT length, which provides ample coverage and a defined 3mm profile for cabinet and panel edges.
The 3mm thickness creates a more substantial edge profile, which supports projects that specify thicker edge treatments and helps the banding visually match other 3mm components.
The 1-5/16 inch width gives extra coverage over common panel thicknesses, allowing edge banders and trimmers to remove overhang and leave a clean, flush edge.
The khaki brown color coordinates with khaki brown surfaces, supporting uniform visual lines on cabinet sides, shelves, and doors where that tone is specified.
The 300 FT length supports longer production runs, helping shops edge multiple cabinets or repeated parts while maintaining stable machine settings and color consistency.
Part number 302114-011 identifies this specific Rehau PVC khaki brown Flex 3mm thick, 1-5/16 inch width x 300 FT edge banding for ordering and inventory purposes.
This Edgebanding, PVC, Khaki Brown Flex 3mm Thick, 1-5/16 inch Width x 300 FT from Rehau, Inc. combines a defined 3mm profile, khaki brown tone, and 300 FT roll length to support continuous cabinet and panel edging. For projects built around khaki brown PVC edges and 3mm programs, this specific width and thickness help keep machining setups consistent from part to part. Add this edge banding to your next Wurth Baer Supply order when you need a khaki brown PVC strip that aligns with these dimensions and supports extended shop runs.
Sold In: 1 Roll