Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding PVC Gull Grey Flex 3mm defines this Rehau, Inc. edge banding as a 3mm thick PVC strip that finishes exposed panel edges in a consistent gull grey color. The 15/16 inch width covers standard board edges with a bit of tolerance, which helps hide small alignment variations along the run. The 300 FT length on a single roll supports longer cabinet or fixture jobs without frequent roll changes, which keeps edge-banding workflows moving steadily. The PVC material provides a uniform profile along the full length, which supports clean trimming and consistent edge appearance. As part of the Edgebanding & Surfacing category, this product is intended for edge finishing tasks, so it fits naturally into cabinet, casework, or furniture production where exposed substrate edges need to be covered. The Rehau, Inc. branding identifies a dedicated manufacturer of edge banding, which matters when matching color and profile across multiple projects.
The 15/16 inch width on this PVC Gull Grey Flex 3mm banding is sized to sit proud of typical panel thicknesses, which lets installers route or trim it back for a flush edge. The 3mm thickness builds a defined front profile, which supports clean shaping at corners and ends. Being categorized as PVC edge banding means it is intended for attachment to panel edges, so it fits standard edge-banding processes on cabinet and furniture parts. The full 300 FT length gives enough material for longer production runs, which reduces interruptions when feeding automated or semi-automated edgebanding equipment.
This Edgebanding, PVC Gull Grey Flex 3mm Thick, 15/16 inch Width x 300 FT product is suited to edge finishing for cabinets, furniture, and other panel-based assemblies where edges must match or coordinate with a gull grey surface. The 3mm thickness works well on doors, drawer fronts, and carcass edges that benefit from a more substantial edge detail, which can visually balance thicker tops or fronts. Because it belongs to the Edgebanding & Surfacing category, it integrates naturally into workflows that use laminate, melamine, or other surfacing materials on panels and then cover exposed cores. The 15/16 inch width matches common panel build-ups, which supports straightforward setup on edgebanding machinery or manual processes without constant width adjustments. The long 300 FT roll allows shops to run a full batch of components in the same color from a single roll, which helps maintain lot-to-lot consistency across a job.
The 3mm thick PVC profile gives enough material at the edge to handle trimming operations smoothly, which supports clean edges when using standard trimmers or routers. That thickness also creates a solid visual line along the panel perimeter, which can disguise small substrate irregularities and deliver a more uniform finished edge. The 15/16 inch width provides extra coverage beyond the panel faces, which offers a margin for minor panel thickness variation while still trimming back to a tight, flush edge. With 300 FT on a single roll, operators can set up an edgebander or manual station once for a given run, which reduces downtime for roll changes and helps keep adjustments consistent from the first panel to the last. The combination of Rehau, Inc. manufacturing and the defined gull grey description helps maintain color and finish continuity when the same banding is used across multiple components on a project.
This Edgebanding, PVC Gull Grey Flex is 3mm thick, which provides a substantial edge profile that trims cleanly and gives doors, drawer fronts, and panels a solid finished edge.
The Rehau, Inc. PVC Gull Grey Flex banding is 15/16 inch wide, which covers standard panel edges with extra material for flush trimming along both faces.
This edge banding is supplied in a 300 FT length, which supports longer cabinet or furniture runs with fewer roll changes during production.
This product is Edgebanding, PVC Gull Grey Flex in the Edgebanding & Surfacing category, so it is intended for finishing exposed panel edges on cabinets and other casework.
This 3mm thick, 15/16 inch wide gull grey PVC edge banding is manufactured by Rehau, Inc., providing a defined source for matching additional rolls.
The manufacturer part number is 302124-056, which helps specify this exact gull grey, 3mm thick, 15/16 inch wide, 300 FT PVC Flex banding for repeat orders.
This Edgebanding, PVC Gull Grey Flex 3mm Thick, 15/16 inch Width x 300 FT from Rehau, Inc. pairs defined dimensions with a consistent gull grey color, which supports repeatable setup and results on panel-based projects. The 3mm thickness, 15/16 inch width, and 300 FT roll length align well with common cabinet and furniture workflows where a substantial, uniform edge is required. Sourcing through Wurth Baer Supply places this edge banding within a broader lineup for the woodworking industry, which helps keep material choices aligned across your shop. Use this specific part number when a 3mm PVC gull grey edge finish is required across multiple components.
Sold In: 1 Roll