White Edgebanding PVC 3mm Thick identifies this Rehau, Inc. edge banding as a PVC-based solution with a 3mm thickness, which gives cabinet and furniture edges a substantial, impact-ready edge profile that visually matches common white surfaces on jobs. The stated 15/16 inch width spans typical panel thicknesses with slight overhang, which allows flush-trimming to a crisp, straight edge after bonding for a finished look. The 300 FT length in each run supports longer installations or multiple cabinet pieces from a single roll, helping larger shops and repeat projects stay on one consistent material. Being part of the Edge Banding product class and listed under Edgebanding & Surfacing|Edgebanding, PVC positions this product for edge finishing tasks where a PVC surface is preferred for appearance and day-to-day use. The manufacturer part number 302124-146 uniquely identifies this specific white, 3mm, 15/16 inch, 300 FT configuration for reordering.
The 3mm thickness of this Rehau PVC edge banding works with setups designed for thicker, more substantial edges, which affects trimming tool settings and feed rates during installation. The 15/16 inch width gives a small but useful margin beyond many common panel thicknesses, which lets installers trim both faces for a flush result without risking core breakthrough. The continuous 300 FT length helps straight-line and contour edgebanders operate through long sequences, which supports steady workflow without frequent material splices. As a PVC edge banding product, it fits into processes already tuned for PVC banding behavior, which matters when matching heat and feed parameters across different white banding SKUs.
This White Edgebanding, PVC 3mm Thick, 15/16 inch Width x 300 FT roll from Rehau, Inc. fits cabinet and furniture builds that specify a white, PVC-based edge in a thicker format. The 15/16 inch width is suited to covering edges on common sheet goods used in casework, allowing installers to cover the full thickness with a small trim margin on each side. The 3mm thickness supports applications where a more pronounced edge detail is part of the design, such as higher-traffic cabinet fronts or shelving edges that benefit from a stout PVC lip. Being categorized as Edge Banding under Edgebanding & Surfacing|Edgebanding, PVC ties this roll directly to edge finishing tasks rather than broad surfacing, which helps project planners slot it into edge-only operations on panels and doors.
The 300 FT length per roll supports shops that cut and band multiple components per job, because the extended length helps maintain identical material across a full run of doors, drawer fronts, and cabinet sides. The SAP description 15/16'X3MM WHITE 300FT PVC FLEX reinforces these dimensions and the flexible PVC nature, which matters when coordinating with drawings or internal material lists that rely on this exact wording for purchasing. The manufacturer part number 302124-146 provides a precise reference for reorders or matching existing installations, which is important when expanding a cabinet run later and aiming to keep the same white, 3mm, 15/16 inch banding.
The 3mm thickness gives tools a clearly defined edge profile to work against, which can help edgebanding and trimming equipment deliver consistent results across many parts in a batch. This thickness also contributes to a solid-feeling edge when handled, which aligns with applications where touch surfaces benefit from a more substantial PVC layer. The 15/16 inch width gives a controlled amount of overhang relative to typical panel sizes, which lets installers tune their trimming passes for a fine final reveal without leaving exposed substrate or under-banded areas.
The 300 FT roll length reduces the number of splices or coil changes within a job, which helps maintain an uninterrupted workflow and keeps edges visually consistent from the first cabinet part to the last. As a white PVC edge banding product from Rehau, Inc., it supports projects that standardize on white PVC for both appearance and process familiarity, which helps shops repeat successful setups across multiple jobs. Together, the specified thickness, width, length, and PVC material class translate into a repeatable edge solution for casework, shelving, and related white furniture components that rely on a defined, durable PVC edge.
This Rehau, Inc. edge banding is 3mm thick, 15/16 inch wide, and supplied in a 300 FT length, which defines the edge profile size and total coverage available for cabinet and furniture parts.
The 3mm thickness creates a more substantial PVC edge profile, which supports a pronounced, durable-feeling edge on cabinet fronts and shelves where a thicker banding is specified in the design.
The 15/16 inch width gives slight overhang on common panels, which allows trimming both faces back to a flush, clean edge without exposing the core material along cabinet or furniture edges.
This white PVC edgebanding suits cabinet and furniture projects using white casework where a PVC edge is needed, providing a matching white edge on doors, drawer fronts, and shelves.
The 300 FT roll length supports long runs and multiple components from a single coil, which reduces changeovers during edgebanding operations and keeps material consistent across the project.
Part number 302124-146 identifies this specific Rehau 3mm thick, 15/16 inch wide, 300 FT white PVC edge banding, which assists when ordering the same material for repeat or expansion work.
This White Edgebanding, PVC 3mm Thick, 15/16 inch Width x 300 FT from Rehau, Inc. provides a known combination of thickness, width, color, and length that supports consistent edge results on white casework. The clearly specified 3mm profile and 15/16 inch width help align tooling setups with the finished edge size, while the 300 FT roll length supports extended production runs. For projects calling for white PVC edges in this dimension set, selecting this 302124-146 banding aligns material choice with the documented properties needed for repeatable cabinet and furniture edge work.
Sold In: 1 Roll