Edgebanding PVC Montana Walnut .018 Thick 15/16 Width x 600 FT is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges, so cabinet and furniture projects present a consistent Montana Walnut appearance along every exposed edge. The .018 inch thickness keeps the banding low profile on the edge, which helps it sit closely to the panel face without a bulky transition after trimming. The 15/16 inch width gives coverage across common panel thicknesses with a small trimming margin, which supports accurate flush-trim work on straight runs. The 600 FT length is suited to multi-part runs or repetitive jobs, reducing material changeout on the bench during production. As a PVC Montana Walnut product in the Edgebanding & Surfacing category, it pairs with matching surfaces for edges that visually tie into the overall panel design.
The 15/16 inch width on this PVC edge banding provides the working margin installers expect for covering common panel edges while leaving enough excess for trimming, which contributes to a straight, flush final edge after routing or scraping. The .018 inch thickness keeps the profile modest, so once bonded, the transition from face to edge reads as a tight line rather than a pronounced shoulder, supporting a cleaner finished appearance during cabinet assembly. With a 600 FT length, this Montana Walnut edge banding gives shops extended run capacity for doors, shelves, and case parts, which simplifies planning a sequence of parts on the same coil and supports consistent results from the first piece to the last.
This PVC Montana Walnut .018 inch thick, 15/16 inch wide edge banding serves as the finishing layer on exposed panel edges in cabinet and furniture work, tying raw edges into surrounding Montana Walnut surfaces. In the Edgebanding & Surfacing category, it acts as the transition between substrate and visible exterior, so the edge reads as a continuation of the panel design. The 600 FT roll length fits shop environments that process multiple parts in sequence, such as runs of shelving or banks of cabinet doors, where using one continuous supply of Montana Walnut banding supports visual consistency across the project line.
The Rehau, Inc. branding and Manufacturer Part # 302164-071 identify a specific Montana Walnut option, which matters when shops match edges to existing installations or repeat a proven finish standard. Because the banding is Montana Walnut in color identity, it aligns with Montana Walnut-patterned surfacing, helping the edge treatment integrate with doors, drawer fronts, and end panels without shifting away from the intended tone.
The .018 inch thickness and 15/16 inch width work together to support predictable trimming and finishing, since the modest thickness stays manageable for edge tooling while the width ensures full coverage with room to cleanly trim back. This dimensional combination helps reduce the chance of exposed substrate on straight edges when applied accurately. The 600 FT length means a single roll covers a substantial number of parts, which supports repeatability because the same Montana Walnut color and thickness carry through the entire run.
The Product Class designation as Edge Banding and the Web Description matching the SAP Description both reinforce that this item is purpose-built for edging applications, giving shops a consistent spec reference in ordering systems. Using the exact Manufacturer Part # 302164-071 ties purchasing, inventory, and production documentation to the same Montana Walnut PVC edge banding, contributing to repeatable selection on future jobs where the same profile and appearance are required.
This edge banding is .018 inch thick and 15/16 inch wide, which supports coverage of common panel edges with a thin profile that trims flush for a clean finished line.
The 600 FT length supports extended production runs, so multiple cabinets or casework parts can be edged from one roll, helping maintain consistent Montana Walnut appearance throughout the job.
The edging is PVC in a Montana Walnut identification, so it functions as plastic edge banding that visually aligns with Montana Walnut surfacing in cabinet and furniture projects.
The .018 inch thickness keeps the banding relatively thin on the edge, which supports smoother trimming and helps the finished edge sit closer to the panel face without a heavy step.
The 15/16 inch width provides slight overhang across typical panel thicknesses, giving installers room to trim back to a fully covered, flush edge without exposing the substrate.
Manufacturer Part # 302164-071 identifies this specific Rehau, Inc. Montana Walnut PVC edge banding, helping shops reorder the same thickness, width, and color for future work.
This Edgebanding PVC Montana Walnut .018 Thick 15/16 Width x 600 FT from Rehau, Inc. combines a defined thickness, practical width, and extended roll length to support edge finishing across cabinet and furniture work. The Montana Walnut identification connects the edge treatment to matching surfacing, helping projects maintain a unified appearance from panel faces to edges. With a clear Manufacturer Part # 302164-071 and specific dimensions, this edge banding fits shops that want repeatable selection and consistent results from one run to the next when working with Montana Walnut designs.
Sold In: 1 Roll