Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC Natural Ash edgebanding from Rehau, Inc. is a PVC edge banding designed to finish raw edges on cabinets, panels, and similar casework where a Natural Ash look is needed. The .018 inch thickness provides a thin, workable PVC layer that covers exposed substrate while keeping build-up low, which helps edges stay flush after trimming. The 15/16 inch width is sized to cover common 3/4 inch panel edges with a bit of overhang, giving room for clean trimming without exposing the core. The 600 FT length in a single roll supports longer production runs or multiple jobs before changing material, which helps keep shop flow steady. The Natural Ash color tone aligns visually with ash-style surfaces so edges read as part of the panel face, reducing visual seams. The product is classified as Edgebanding & Surfacing, so it fits into standard cabinet and furniture workflows that rely on PVC edge treatment.
This edge banding uses a 15/16 inch width, which covers standard panel edges while leaving trimming allowance, helping installers get tight, chip-free edges after bonding. The .018 inch thickness means the material adds minimal bulk to the panel edge, which supports smooth alignment at doors and drawer fronts where gaps are tight. Being PVC, the banding is suited to machining with typical edge trimming tools used in cabinet shops, which supports consistent results from piece to piece. With 600 FT on a roll, installers can work through a sequence of components on the same color and size without frequent material changes, supporting faster, more organized edge work on cabinetry and case goods.
This Rehau, Inc. edge banding is described as Edgebanding, PVC Natural Ash with .018 inch thickness and 15/16 inch width, positioning it for use on cabinet and furniture components that need a Natural Ash edge. The 15/16 inch width works well along vertical cabinet sides, shelves, and doors built from common panel thicknesses, giving coverage and trim margin in each application. As an Edgebanding & Surfacing product, it fits into production lines or shop setups already organized around PVC edge finishing, so it can be added where a Natural Ash edge is specified. The 600 FT roll length supports runs of matching pieces, such as a full kitchen, bank of office cabinets, or series of casework panels, keeping the color and size consistent across the project. The thin .018 inch PVC construction helps edges meet face materials with a subtle transition, which is useful when panels meet at corners or when doors sit close to face frames or other fronts.
The manufacturer part number 302164-135 uniquely identifies this Natural Ash PVC edge banding, helping buyers match the same material when repeating a job or adding to an existing installation. The .018 inch thickness provides a stable yet low-profile edge, which contributes to predictable trimming and reduces the chance of a noticeable ridge where parts meet. The 15/16 inch width offers enough overhang to handle slight panel size variations and saw tolerances, which helps reduce rework from exposed substrate on edges. The 600 FT length supports planning for yield on cut lists, allowing shops to estimate footage per cabinet run and handle multiple orders from the same roll. As a PVC edge banding, the material is intended to work within common shop processes for bonding and trimming synthetic edging, which supports consistent results across different operators using the same tools and settings.
The edgebanding is 15/16 inch wide and .018 inch thick, which suits typical panel edges and provides a thin profile that trims cleanly for cabinet and furniture work.
The roll length is 600 FT, which supports longer cabinet or casework runs so shops can edge multiple components in the same Natural Ash material.
This product is PVC edge banding, giving a consistent synthetic surface that suits common edging, trimming, and machining processes in woodworking shops.
This PVC Natural Ash edgebanding is used on exposed edges of cabinets, panels, and similar casework where an ash-toned edge is needed to match the surface.
The .018 inch thickness keeps the edge banding slim, which helps edges sit close to flush with the panel face for a smooth, low-build appearance.
The part number 302164-135 identifies this specific Rehau PVC Natural Ash edgebanding size and color, helping buyers reorder the same edging for repeat work.
This Edgebanding, PVC Natural Ash .018 inch Thick, 15/16 inch Width x 600 FT from Rehau, Inc. offers a defined size, color, and material for edging cabinets and panels. The combination of 15/16 inch width, .018 inch thickness, and 600 FT length gives shops a repeatable option when planning Natural Ash casework. For projects built around ash-toned faces, this PVC edge banding provides a matching edge solution that fits within standard woodworking and cabinet production routines. Choose this 302164-135 edge banding when a consistent Natural Ash PVC edge is needed across multiple components on the same job.
Sold In: 1 Roll