PVC Storm edgebanding 15/16 inch defines this Rehau, Inc. edge banding as a PVC-based solution sized for edging panel and board edges in one continuous width. The .018 inch thickness provides a slim edge profile, which helps create a clean transition between the face material and the edge on cabinets or furniture panels. The 15/16 inch width covers typical panel thickness with slight overhang for trimming, giving installers working room to flush-trim without exposing the core. The 600 FT length is suited to longer runs or multiple projects from a single roll, reducing changeovers during production. As an edge banding from the Edgebanding & Surfacing category, this product is intended to finish exposed edges so they match or coordinate with the Storm color surface. The Rehau, Inc. brand and manufacturer part number 302284-610 identify this specific PVC Storm option for repeat ordering.
This edge banding is defined as PVC Storm .018 inch thick, 15/16 inch width x 600 FT, so it is sized for covering exposed panel edges where that width can be trimmed down to a flush edge. The 15/16 inch dimension gives coverage that extends beyond typical panel faces, which supports standard edge-banding workflows that rely on trimming back to the face material. The .018 inch thickness keeps the edge profile relatively thin, which can be important where a subtle edge appearance is desired on cabinetry or furniture components. Being classified under Edgebanding, PVC, this product is intended for applications where a PVC material edge is preferred to finish and protect raw panel edges.
This edge banding is identified as Edgebanding, PVC Storm .018 inch Thick, 15/16 inch Width x 600 FT, placing it in the role of finishing exposed edges on panels used in cabinets, furniture, or similar projects. The 15/16 inch width gives coverage across the edge with extra margin, which supports trimming back for a clean line along the face of the board. Because the material is PVC, it provides a uniform, machinable edging that aligns with other PVC-based surfacing choices. The Storm designation in the description indicates a specific color tone, allowing this edge banding to visually coordinate with Storm-colored surfaces in a layout. For shops that run repeated projects in the same color, the 600 FT length supports multiple edge-banding runs from a single roll, which can maintain visual consistency across job phases.
The .018 inch thickness of this Rehau, Inc. edge banding defines a thinner PVC layer, which helps the installer create a finished edge that does not add excessive bulk while still hiding the substrate along the edge. That thickness also supports routine trimming and scraping processes commonly used with PVC edge banding on cabinetry components. The 15/16 inch width is slightly wider than many panel thicknesses, which gives tolerance during application so minor alignment shifts still leave full edge coverage before trimming. The 600 FT roll length reduces the need to switch rolls during longer runs, which can support continuous feeding through edge-banding equipment or extended manual application sessions. Identifying this product by manufacturer part number 302284-610 allows fabricators to specify the same thickness, width, color, and material every time, supporting repeatable results across projects and reorders.
This Rehau, Inc. 302284-610 product is PVC edgebanding, which provides a machinable plastic edge suited to finishing exposed panel edges on cabinets or furniture projects.
The .018 inch thickness creates a relatively thin PVC layer, helping the finished edge stay low profile while still covering and protecting the raw panel edge.
The 15/16 inch width is suited to edging panels where that width spans the board thickness, then is trimmed flush to the surface for a clean cabinet or furniture edge.
The Storm description identifies the color of this PVC edgebanding, allowing it to coordinate visually with Storm-colored surfaces in a project layout.
The 600 FT length supports longer edging runs from a single roll, which can reduce roll changes during cabinet or furniture production work.
The Rehau 302284-610 part number identifies this exact PVC Storm .018 inch thick, 15/16 inch width x 600 FT edgebanding for accurate specification and reordering.
This Rehau, Inc. Edgebanding, PVC Storm .018 inch Thick, 15/16 inch Width x 600 FT provides a defined thickness, width, color, and length for edging cabinet or furniture panels. The combination of .018 inch PVC thickness and 15/16 inch width supports standard trimming workflows while covering exposed edges. The 600 FT roll length offers capacity for extended runs, and the manufacturer part number 302284-610 identifies this exact configuration for consistent use. For projects built around Storm-colored surfaces and PVC edging, this edgebanding offers a clearly specified option ready to integrate into shop processes.
Sold In: 1 Roll