PVC edgebanding charcoal defines this Rehau, Inc. edge banding as a PVC strip designed to finish and protect exposed panel edges with a consistent charcoal color. The 1mm thick construction gives the edge a solid, substantial profile that stands up to routine handling on cabinetry and casework. The 15/16 inch width is sized to cover common 3/4 inch board thickness while allowing a trim margin along both sides for a tight finished line. The 600 FT length is supplied as a continuous run, supporting longer production stretches and reducing changeover time on edgebanders. Being classified as edge banding in the edgebanding and surfacing category keeps its role straightforward: it is dedicated to capping raw board edges so the finished parts match surrounding surfacing materials. The manufacturer part number 302474-058 identifies this specific charcoal PVC size and thickness for repeat jobs.
The 15/16 inch width of this PVC edgebanding is sized to work with panels in the common 3/4 inch class, giving a modest overhang on each side for trimming. The 1mm thick profile suits edge banding methods where a solid-feeling edge is desired without adding excessive thickness beyond the face material. As edge banding in the PVC category, it is suited to standard edge banding equipment and workflows designed around PVC materials. The continuous 600 FT length supports setups where long runs on an edgebander are preferred, so operators can process multiple cabinet parts in sequence while keeping the same charcoal edge color and dimension across the batch.
This PVC charcoal 1mm thick, 15/16 inch width x 600 FT edge banding is applied to exposed edges of cabinet components, shelves, and similar boards where a PVC-based finish is desired. The edge banding and surfacing classification places it in applications where panel faces are already finished with complementary materials and the edges need to match. The 15/16 inch sizing aligns with edge treatment on boards around 3/4 inch thick, letting fabricators run the material along door, drawer front, or carcass edges and then trim back to the panel surface. In shop workflows, the continuous 600 FT roll supports repeated passes on production edgebanding equipment, so a full kitchen or casework run can share the same charcoal edge treatment.
The 1mm thickness of this Rehau, Inc. PVC edge banding sets the feel and visual depth of the finished edge, offering a defined transition from face material to edge that stands up to routine handling. The 15/16 inch width provides enough coverage to center on typical 3/4 inch substrates and still allow for trimming, which helps produce straight, chip-free edge lines once excess is removed. By providing 600 FT in a single roll, the product allows longer runs without material changes, which supports color consistency and dimensional repeatability across many parts in a job. Having a defined manufacturer part number, 302474-058, ties all these details together so shops can match the same charcoal, PVC, 1mm thick, 15/16 inch width material whenever they repeat that edge specification on later projects.
This edge banding is 1mm thick, 15/16 inch wide, and 600 FT long, which defines how it covers typical 3/4 inch panels and supports longer production runs.
This Rehau, Inc. product is PVC edgebanding in a charcoal color, giving cabinet and panel edges a dark, consistent finish that coordinates with charcoal surfacing.
The 1mm thickness creates a solid-feeling PVC edge profile, which supports a defined, durable edge transition on cabinet and panel workpieces.
The 15/16 inch width gives coverage over 3/4 inch boards with a small overhang, which allows trimming back to a clean, flush edge on both faces.
The 600 FT roll length supports extended runs on edgebanding equipment, which helps maintain consistent charcoal color and dimensions across many parts.
Manufacturer part number 302474-058 identifies this specific Rehau PVC charcoal edgebanding in 1mm thickness, 15/16 inch width, and 600 FT length for repeat ordering.
This Edgebanding, PVC Charcoal 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. combines a defined 1mm thickness, 15/16 inch coverage, and long 600 FT roll for cabinet and surfacing projects. The charcoal PVC construction matches dark finishes, and the specified size supports edge treatment workflows built around 3/4 inch panels. For repeat jobs needing the same look and dimensions, the manufacturer part number 302474-058 provides a clear reference so shops can align future work to the same edging standard.
Sold In: 1 Roll