PVC Zanzibar edgebanding provides a 3mm thick PVC edge on panels so exposed board edges gain a finished, protected surface in one continuous run. The 15/16 inch width covers common panel thicknesses with margin for a clean trim on both faces. The 300 FT length is suited to production or multi-cabinet runs because long lengths reduce changeovers and keep edges consistent across pieces. The PVC material forms a durable, uniform edge surface around the panel perimeter. The Zanzibar identification in the description defines the specific decor or program line for projects that follow a defined finish scheme. As Rehau, Inc. edgebanding, this product matches the manufacturer identity many shops standardize on for repeat work. The edge banding product class confirms this roll is intended specifically to cover and finish raw edges during cabinet or furniture construction.
The 15/16 inch width of this PVC Zanzibar Flex edge banding sets the working margin when applying it to panel edges, because the band overhangs the faces slightly for trimming. The 3mm thickness defines the finished edge build, so operators can set trimmers and routers to remove excess while preserving the full 3mm profile. The 300 FT roll length shapes how shops plan production runs, since a single roll can edge many linear feet before a change is needed. The edge banding product class and PVC material description signal that this roll is designed to apply along panel edges rather than flat surfaces, guiding where it is used in the workflow.
This edgebanding, described as PVC Zanzibar Flex with 3mm thickness and 15/16 inch width, fits panel edges where a defined 3mm profile is part of the design intent. The combination of 3mm thickness and nearly 1 inch width works on standard panel constructions where the band is trimmed flush after application. The 300 FT length supports shop environments producing multiple cabinets, fixtures, or furniture pieces from the same decor line. The Zanzibar designation and manufacturer Rehau, Inc. together define a specific PVC edge program, allowing projects to maintain a consistent appearance when this exact description is specified across drawings or cut lists. As edge banding, it plays the role of covering exposed panel cores, creating a continuous finished boundary around each component in the assembly.
The stated 3mm thickness gives installers and machine operators a fixed edge build, so setup of trimmers, routers, and presses can be dialed to this single profile and repeated from job to job. The 15/16 inch width provides predictable overhang for trimming, which supports cleaner, more consistent flush edges along both faces of the panel after machining. The 300 FT roll length reduces the number of roll changes across a production run, which supports uniform color and edge appearance from the first panel to the last when using this PVC Zanzibar Flex product. The manufacturer part number 302596-015 and the edge banding product class tie ordering, setup notes, and shop standards to one clearly identified material, which helps fabricators keep edge details consistent whenever this PVC Zanzibar edgebanding is specified.
The edgebanding is described as PVC Zanzibar Flex, so it uses PVC material to create the finished edge surface along panel sides.
The PVC Zanzibar Flex edgebanding is 3mm thick, providing a defined edge build that guides trimming settings and finished profile appearance.
The stated 15/16 inch width covers standard panel thicknesses with extra margin, allowing both faces to be trimmed back to a flush 3mm edge.
The roll length is 300 FT, supporting longer production runs and helping keep edge appearance consistent across multiple components.
The number 302596-015 is the manufacturer part identifier for this specific 3mm thick, 15/16 inch wide PVC Zanzibar Flex edgebanding.
This item is classified as edge banding within Edgebanding, PVC, indicating its role is to finish and protect panel edges.
This Rehau, Inc. PVC Zanzibar Flex edge banding combines 3mm thickness, 15/16 inch width, and a 300 FT roll length to serve edge-finishing tasks on panel projects. The clear identification as edge banding within Edgebanding, PVC and the specific manufacturer part number 302596-015 align material ordering with shop standards. For work that specifies a 3mm PVC edge in the Zanzibar line, this description defines a consistent choice that can be applied across cabinets, fixtures, or furniture runs that require a uniform panel edge appearance.
Sold In: 1 Roll