Rehau PVC Edgebanding 15/16" x 3 mm, Sarum Twill, Flex, 300', 302596 020

PVC Edgebanding 3mm 15/16 Sarum Twill For Panels

PVC edgebanding 3mm 15/16 Sarum Twill defines this Rehau, Inc. edge banding as a PVC Sarum Twill Flex strip designed to finish exposed panel edges, so cabinet and fixture projects get a consistent, matched edge surface. The 3mm thick PVC construction creates a substantial edge profile that covers raw substrate and protects the edge line in normal woodworking use. The 15/16 inch width gives coverage across typical panel thicknesses while allowing a slight overhang for trimming, which supports clean, straight final edges. The 300 FT roll length supports longer production runs or multiple jobs from a single product, reducing changeovers during edge banding work. As part of the Edgebanding & Surfacing category, this PVC Sarum Twill Flex product is suited to surfacing applications where a coordinated edge is needed. The edge banding format helps streamline finishing steps by turning raw board edges into visually continuous surfaces.

Key PVC Sarum Twill Flex Job Advantages

• The 3mm thick PVC Sarum Twill Flex construction forms a robust edge layer that covers exposed core material, which helps create a uniform, finished edge along cabinet or furniture panels.
• The 15/16 inch width is sized to span standard panel thickness with trim margin, so installers can route or trim flush and produce straight, chip-free edges on casework components.
• The 300 FT length is suited to production-oriented runs, allowing longer continuous edgebanding passes that can reduce roll changes during repetitive edging tasks across multiple panels.
• The Sarum Twill designation identifies a specific color and pattern identity within the PVC line, which supports visual coordination between the edge banding and matching surfacing materials on the same project.
• The edge banding PVC material aligns with its Edgebanding & Surfacing category, giving shops a dedicated product for covering raw board edges where a consistent PVC surface is desired.

Edgebanding Size And Roll Details For Installers

This edge banding from Rehau, Inc. uses a 3mm thickness, providing a noticeable PVC layer that can be machined after bonding for a smooth transition at the panel edge. The 15/16 inch width sets up a slight overhang on common board thicknesses, giving installers material to trim back to a flush, square finish. With 300 FT provided on a single roll, shops can edge multiple cabinets, shelves, or fixtures from one continuous length, supporting repeatable machine setups. As a PVC Sarum Twill Flex product, it belongs in workflows focused on PVC-based edgebanding where the same edge material runs across many parts to keep color and pattern consistent.

Using This PVC Edge Banding In Real Projects

Where This Rehau PVC Edgebanding Fits Best

This Rehau, Inc. edge banding is designated as PVC Sarum Twill Flex with a 3mm thick profile, positioning it for projects where a thicker PVC edge is preferred on cabinet, furniture, or fixture components. The 15/16 inch width aligns with edging tasks on standard sheet goods, letting installers apply it along vertical cabinet sides, shelf fronts, or top and bottom edges where the raw core would otherwise be exposed. Because it sits in the Edgebanding, PVC class under the broader Edgebanding & Surfacing category, it naturally fits workflows built around PVC surfaces, such as laminated casework or similar surfacing schemes. The Sarum Twill identification gives the edge banding a defined visual role within those systems, supporting projects that rely on uniform appearance from face material to edge.

Why These Dimensions Support Repeatable Results

The 3mm thickness of this PVC Sarum Twill Flex banding provides enough material depth to handle trimming and light machining without cutting through to the substrate, which helps keep edges visually solid after processing. Its 15/16 inch width gives an installer practical tolerance on both sides of the board edge, allowing fine adjustment during trimming so edges stay straight across multiple parts. The 300 FT roll length keeps the same Rehau, Inc. material running through edgebanding equipment for extended periods, which supports consistent color and edge profile from the first panel to the last. Identified by manufacturer part number 302596-020, this specific size and Sarum Twill variant can be referenced when repeating jobs, helping shops return to the identical edge banding for future runs.

Common Sarum Twill PVC Edgeband Buyer Questions

Select This PVC Edgebanding For Matching Sarum Twill Jobs

This Edgebanding, PVC Sarum Twill Flex 3mm Thick, 15/16 inch Width x 300 FT from Rehau, Inc. gives shops a defined Sarum Twill PVC option for edging projects. The combination of 3mm thickness, 15/16 inch width, and 300 FT length supports production-friendly edging on panels that need a coordinated Sarum Twill appearance from surface to edge, making this specific 302596-020 edge banding a practical choice when planning repeatable woodworking runs.