Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding PVC Fawn Cypress Flex 3mm closes out raw panel edges with a PVC strip in a Fawn Cypress tone, so exposed sides transition cleanly to the surfaced face. The 15/16 inch width covers standard panel thicknesses with margin to trim, which supports tight visual alignment along cabinet and furniture runs. The 3mm thickness builds a more substantial edge, which helps edges read solid instead of thin in finished installations. The 300 FT length is supplied on a single roll, giving enough material to run multiple cabinets or longer projects without frequent spool changes. The flexible PVC construction allows the strip to follow straight runs and gentle curves, so it can be applied along typical casework layouts. The Rehau, Inc. branding identifies the manufacturer, which supports matching this Fawn Cypress edge banding to other Rehau PVC surfacing materials in the same project.
The 15/16 inch width of this Rehau PVC Fawn Cypress Flex edge banding gives installers room to align the strip on either face before trimming, which simplifies setup on edge banding equipment or hand application workflows. The 3mm thickness determines cutter and trimmer settings, so edges can be flushed without removing too much material from the band. The total 300 FT length per roll supports planning for job takeoffs, because linear edge requirements can be matched closely to this roll quantity. The PVC construction and flexible format support typical edgebanding application techniques used with PVC edge materials in woodworking shops.
This PVC Fawn Cypress Flex 3mm Thick, 15/16 inch Width x 300 FT edge banding fits projects that use sheet goods needing a coordinated Fawn Cypress edge. As an Edge Banding product in the Edgebanding & Surfacing category, it is suited to closing the edges of cabinetry, furniture components, and similar panel-based assemblies. The 15/16 inch width works with common panel thicknesses, so it can be centered on the edge and trimmed back to the faces without exposing core material. The 3mm thickness helps create a defined edge line on doors, drawer fronts, and shelves, which is often preferred where a more substantial visual edge is desired along vertical and horizontal elements.
The 3mm thickness of this Rehau PVC edge banding gives trimmers and routers a predictable amount of material, supporting consistent flush results from part to part. The 15/16 inch width offers just enough overhang for alignment without excessive waste, which helps maintain a repeatable workflow as multiple panels move through the edging process. The 300 FT roll length reduces interruptions during production runs, allowing long cabinet banks or multiple room sets to be edged from a single roll, which supports color consistency along all exposed edges. The manufacturer part number 302596-059 precisely identifies this Fawn Cypress Flex variant, which matters when reordering material to match earlier work on the same project or across locations.
This Rehau, Inc. PVC edge banding is 3mm thick, 15/16 inch wide, and 300 FT long, which defines trimmer settings and helps plan linear footage for cabinet or furniture edge runs.
The 3mm thickness builds a more substantial edge profile, giving more material to trim and shaping a defined edge line on doors, drawer fronts, and shelving panels.
The 15/16 inch width provides coverage over standard panel thicknesses with slight overhang, allowing installers to center the band and trim both faces flush for clean reveals.
The Fawn Cypress color on the PVC banding aligns the edge tone with Fawn Cypress-style surfaces, helping edges visually blend with matching or coordinating panels.
The 300 FT length provides continuous edging for longer production runs, reducing roll changes and helping maintain consistent appearance across multiple panels or cabinet sections.
The manufacturer part number 302596-059 uniquely identifies this PVC Fawn Cypress Flex 3mm, 15/16 inch, 300 FT edge banding, supporting repeat orders that match previous work.
This Edgebanding, PVC Fawn Cypress Flex 3mm Thick, 15/16 inch Width x 300 FT from Rehau, Inc. gives a defined Fawn Cypress edge in a standard width and thickness that fit cabinet and furniture work. The 300 FT roll length supports multi-piece runs, while the 3mm profile and 15/16 inch span align with common edging setups. For projects calling for a coordinated Fawn Cypress edge treatment on sheet goods, this Edge Banding format is suited to shop workflows that rely on PVC edgebanding materials.
Sold In: 1 Roll