Rehau ABS Edgebanding 15/16" x 1 mm, Dawning Ash, 600', 315431 316

PVC Dawning Ash Edgebanding For Clean Panel Edges

PVC Dawning Ash edgebanding from Rehau, Inc. is a PVC edge banding designed to finish raw panel edges in a Dawning Ash tone, so cabinet and furniture projects gain a consistent, finished perimeter. The 1mm thick construction provides a defined edge profile that helps cover minor panel irregularities and gives a solid feel at the edge. The 15/16 inch width matches common panel thicknesses, allowing the installer to cover the edge fully and trim flush without starving the face of material. With a 600 FT length on a single roll, this edge banding supports longer production runs or multiple jobs without frequent changeovers, which helps maintain workflow in the shop. Classified under Edgebanding & Surfacing as Edge Banding, it fits naturally into standard woodworking and cabinet production processes where a PVC Dawning Ash edge is required.

Key Dawning Ash Edgebanding Details For Pros

• The PVC construction provides a stable edging material for cabinets and furniture, giving a consistent surface that works well in typical woodworking environments and helps maintain a uniform look along panel edges.
• The Dawning Ash color identification ties the banding to Dawning Ash panel designs, so visible edges align with the face material and reduce contrast at seams where the panel core would otherwise show.
• The 1mm thick profile gives enough material to create a substantial edge while trimming, which supports clean routing or scraping without cutting through and reduces rework on finished pieces.
• The 15/16 inch width is sized to cover the edge of standard thickness boards with trim allowance, giving fabricators room to flush-trim both sides for straight, clean lines on doors, shelves, and casework.
• The 600 FT roll length supplies a large quantity in one continuous run, which supports batching of parts, limits downtime between rolls, and simplifies inventory handling on recurring Dawning Ash projects.
• The Rehau, Inc. branding and manufacturer part number 315431-316 clearly identify this specific Dawning Ash PVC edge banding, helping shops reorder the same material and keep color and thickness consistent across jobs.

Installation-Oriented Details For Dawning Ash Edging

This Rehau PVC Dawning Ash 1mm Thick, 15/16 inch Width x 600 FT edge banding is sized for standard edge banding equipment and manual application workflows, so installers can feed or apply the material and then trim it back for a flush edge. The 1mm thickness gives enough body for trimming tools to ride the surface and create a straight, chipped-free edge that supports a clean finished line along cabinet doors, drawer fronts, or case edges. Because the width is 15/16 inch, there is margin beyond typical board thickness, which helps when panels are slightly oversized and still allows a flush cut after application. In combination, the thickness and width support predictable trimming and finishing steps from part to part.

Using This Edge Banding In Shop Production

Where This Dawning Ash Edge Banding Fits Best

This Edgebanding, PVC Dawning Ash 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. fits naturally into woodworking projects that use Dawning Ash-toned panels and need matching edges. As part of the Edgebanding & Surfacing category and Edge Banding product class, it works in cabinet shops, commercial millwork, and furniture production where panel edges would otherwise expose the core. The Dawning Ash identification keeps the edge appearance aligned with Dawning Ash-faced materials, so doors, end panels, and shelving have a continuous look around all visible sides. The 600 FT length supports both one-off projects and repeated Dawning Ash runs, letting shops edge multiple components from the same roll so color and thickness stay consistent across the entire job. By relying on one defined thickness of 1mm and a width of 15/16 inch, shops can standardize machine setups for Dawning Ash jobs and keep throughput steady.

Why These Dimensions Support Repeatable Results

The 1mm thickness on this Rehau Dawning Ash edgebanding creates a predictable edge profile that trimming and finishing tools can reference, which helps deliver repeatable results from part to part. Because the material is PVC, it provides a uniform surface along the edge, supporting consistent cutting behavior and reducing edge variation when routing or scraping. The 15/16 inch width gives working room on both sides of common panel cores, so even slight panel size variations still leave enough banding to flush-trim cleanly without exposing the core. With a continuous 600 FT roll, shops can edge long runs of Dawning Ash components under the same setup, which supports consistent output and reduces interruptions. The clear product identity, including the manufacturer part number 315431-316, allows production teams to specify the exact same edging each time a Dawning Ash project is scheduled, helping maintain visual continuity on repeat installations.

Common Questions About Rehau Dawning Ash Edging

Choose This Dawning Ash Banding For Matching Edges

The Edgebanding, PVC Dawning Ash 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. provides Dawning Ash color, 1mm thickness, and a 15/16 inch width on a 600 FT roll, so shops can match panel faces, edge multiple components, and keep output consistent on Dawning Ash projects. Selecting this identified Rehau PVC edge banding with part number 315431-316 aligns material choice, appearance, and dimensions for repeatable cabinet, furniture, and millwork production where Dawning Ash edges are required.