PVC charred ebony edgebanding provides a PVC edge banding solution in a charred ebony color, so cabinet and furniture projects gain a finished edge that visually matches dark wood-inspired surfaces. The 1mm thick construction supplies a substantial PVC layer at the edge, which supports a solid feel and consistent profile during trimming and flush routing. The 15/16 inch width covers standard panel edges with room to trim, helping installers hide minor alignment variation while still ending with a clean line. With a 600 FT length on a single run, the material supports longer production sequences or multiple cabinets without frequent roll changes, which helps maintain workflow on repetitive edge work. The product is identified as edge banding in the PVC category, which positions it for typical cabinet, furniture, and casework edge finishing where a PVC solution is preferred over other edge treatments.
The 15/16 inch width of this PVC edgebanding gives installers coverage across the face of common panel thicknesses with extra material at each side, which is useful when aligning banding under fast-paced shop conditions. That overhang can then be trimmed back, letting edge banders or hand tools create a flush, straight edge without exposing the core material. The 1mm thickness affects how the edge rides against trimming and scraping tools, giving a noticeable surface that responds predictably in finishing passes. With 600 FT available in one continuous length, shops can plan long production runs of cabinets or casework edges with consistent material characteristics from the first part to the last.
This Rehau, Inc. PVC charred ebony edgebanding is positioned as edge banding for panel edges in cabinet, furniture, and general casework applications where a PVC edge treatment is suitable. The 15/16 inch width lines up well with panel-based construction, so builders working with sheet goods can apply it along exposed sides, tops, and bottoms to create a continuous edge appearance. The charred ebony color serves projects designed around dark tones, giving the edge a coordinated shade relative to deep, wood-look or dark decorative faces. Because the product is part of the Edgebanding, PVC class, it matches workflows where PVC edgebanding is the standard approach for finishing raw edges in production or shop environments.
The 1mm thick profile of this PVC charred ebony edgebanding supplies a measurable edge layer, which supports repeatable trimming and scraping passes across multiple parts, helping maintain the same reveal and contour from piece to piece. The 15/16 inch width offers installers a repeatable amount of overhang during application, so trimming operations can be set up around that dimension when running series work. Having a 600 FT length means the same roll can serve a sequence of cabinets or furniture parts, reducing material changes and keeping edge color and thickness consistent throughout a job. The manufacturer part number 315431-317 identifies this exact charred ebony, 1mm, 15/16 inch, 600 FT PVC variant, which matters when matching previous installs or aligning shop documentation to a specific PVC edgebanding used on recurring projects.
This edgebanding is PVC, which places it in the Edgebanding, PVC category and aligns it with common PVC edge finishing methods in cabinet and furniture shops.
The 1mm thick profile provides a substantial PVC layer at the edge, giving trimming and scraping tools a consistent surface for controlled, uniform finishing passes.
The 15/16 inch width covers typical panel edges with slight overhang, allowing installers to trim back to a flush, clean edge without exposing the panel core.
The charred ebony color supports cabinet, furniture, and casework projects built around dark or wood-inspired finishes by giving the edge a coordinating dark tone.
The 600 FT length lets shops run multiple cabinets or a long casework series from one roll, promoting consistent appearance and reducing material changeovers.
Rehau 315431-317 identifies this specific PVC charred ebony edgebanding in 1mm thickness, 15/16 inch width, and 600 FT length for precise product selection and reordering.
This PVC charred ebony edgebanding from Rehau, Inc. combines a 1mm thickness, 15/16 inch width, and 600 FT length to support cabinet, furniture, and casework edge finishing around dark design schemes. For projects calling for a PVC edge banding in a charred ebony tone, this edge banding supplies the dimensions and color profile needed to keep panel edges visually aligned with the overall look while supporting steady, repeatable trimming across multiple parts.
Sold In: 1 Roll