Edgebanding, PVC, Mountain Oak 1.2mm Thick, 24mm Width x 600 FT

PVC Edgebanding Mountain Oak 24mm For Panels

PVC edgebanding Mountain Oak 24mm gives woodworking shops a defined way to finish exposed panel edges while keeping material coordination organized across jobs. This Rehau, Inc. edge banding is made from PVC, so it provides a consistent man-made surface that works well with cabinet and furniture components using similar materials. The Mountain Oak identification ties this banding to a specific design line, which matters when panels and trim need to share the same look across doors, drawer fronts, and casework runs.

The 24mm width provides coverage for panel edges sized for that band, so installers can set up trimming knowing the banding will span the edge without excessive overhang. Its 1.2mm thickness gives the edge a defined profile compared to thinner tapes, which helps create a sturdier-feeling edge transition on cabinet parts.

The 600 FT length per roll supports longer production runs before material changeover, keeping banding of the same Mountain Oak design on hand for multiple cabinets or matching replacement work.

Key Mountain Oak PVC Edgebanding Details

• The 24mm width is sized to cover matching panel edges, which supports clean routing and trimming while maintaining a consistent reveal along cabinet and furniture components.
• The 1.2mm thickness gives the edge banding a more substantial profile, which helps panels feel solid at the edge and provides material to flush-trim without cutting into the substrate.
• The 600 FT length on this roll supports extended runs, so shops can process multiple pieces in the same session while keeping the Mountain Oak design consistent across fronts and cases.
• The PVC material gives this Rehau, Inc. edge banding a uniform, engineered surface, which simplifies working with common woodworking processes that are set up for PVC edges.
• The Mountain Oak designation ties this edge banding to a specific appearance line, which helps maintain visual continuity wherever matching Mountain Oak components are used.

24mm PVC Edge Banding Fit And Use

This Rehau, Inc. edge banding is 24mm wide, so it fits panel edges designed around that dimension and gives installers a clear target when sizing parts in the shop. The 1.2mm thickness puts it in a thicker PVC category, which allows trimming tools to reference a solid edge layer rather than a film-like strip, helping maintain control at the router or trimmer.

The 600 FT roll length aligns with workflows that process groups of doors, drawer fronts, or carcass parts in a single setup. Because this product is part of the PVC edge banding class, it integrates into edge-banding operations already configured for PVC tape, from gluing to trimming and finishing steps.

How This Mountain Oak Edgeband Works In Practice

Where Mountain Oak PVC Edgebanding Is Applied

This edge banding is classified as Edgebanding & Surfacing, PVC, so it is used on exposed edges of panels where a PVC finish is desired. The 24mm width allows it to cover edges on components proportioned for that band, which is common on cabinet sides, shelves, and wider door or drawer parts that need a defined front edge. As a Mountain Oak design, it is intended to coordinate with panel faces and parts using the same Mountain Oak look, so doors, drawer fronts, and cases can share a consistent edge appearance.

Being 1.2mm thick, this banding builds a noticeable edge on workpieces, which is useful where users contact the front edge frequently, such as cabinet doors and frequently used shelves. The PVC construction aligns with typical woodworking environments supplied by Wurth Baer Supply, fitting into projects that already rely on man-made surfacing materials and need an edge detail to match.

Why These Edgebanding Details Support Consistency

The 1.2mm thickness on this PVC edgeband provides enough material for trimming tools to run cleanly without cutting into the underlying panel, helping finished parts stay uniform from piece to piece. That thickness also shapes the front edge into a more solid-feeling band, which supports repeatable handling on cabinet doors and case components over time.

The 24mm width helps maintain a regular reveal along the full run of an edge, since panels can be sized to work with that exact band dimension. When shops standardize on this width, they can set machinery and patterns around a single edge size and repeat those settings on follow-up jobs. The 600 FT length of this roll supports larger projects or multiple smaller runs using the same Mountain Oak look, which keeps replacement fronts or added cabinets visually aligned with earlier work.

Common Questions About Rehau Mountain Oak Edgeband

Selecting This PVC Edgebanding For Your Work

This Rehau, Inc. Mountain Oak PVC edgebanding brings together a 24mm width, 1.2mm thickness, and 600 FT length that align well with cabinet and furniture panel work using this specific design. The PVC material and Mountain Oak designation connect it directly to projects built around PVC surfacing in the same look. For shops and installers needing a defined, repeatable edge treatment in Mountain Oak across doors, drawer fronts, and casework, this roll provides the dimensions and format to support that workflow from first run through later matching pieces.