Edgebanding PVC Capital Starlit 1mm gives you a PVC edge banding solution in the Capital Starlit design for finishing exposed board edges. The 1mm thick construction provides a defined edge profile that supports clean machining on typical woodworking equipment. The 15/16 inch width suits common panel thicknesses where a slight overhang is trimmed back for a flush edge, helping achieve a straight visual line on cabinets and furniture components. The 600 FT length supplies a continuous run for multiple parts or larger jobs, reducing changeovers during production. As part of the Edgebanding, PVC product class, this material is intended for surfacing and edge finishing tasks in woodworking environments. The product is supplied under the Rehau, Inc. brand with manufacturer part number 327875-142, so shops can reference an exact specification for repeat orders and consistent appearance across projects.
This Edgebanding, PVC Capital Starlit 1mm product is sized at 15/16 inch width, giving installers working tolerance when applying it to boards with standard thicknesses. That width allows a slight overhang on both faces, which is then trimmed for a flush, square edge. The 1mm thick material presents a defined edge corner after trimming, which supports a clean junction between the banding and the panel surface. With 600 FT available on a single product, shops can run longer sequences of parts with the same setup, supporting efficient workflows when edging cabinet doors, shelves, or case components that share the Capital Starlit design.
This Edgebanding, PVC Capital Starlit 1mm Thick, 15/16 inch Width x 600 FT is positioned for woodworking and surfacing work handled by Wurth Baer Supply customers. As a PVC edge banding product within the Edgebanding & Surfacing category, it is suited to finishing raw edges on panels used in cabinetry, furniture, and similar casework. The 15/16 inch width matches well with common panel thicknesses used in these applications, helping cover the core material and present the Capital Starlit design along visible edges. The 1mm thickness allows the edge to be shaped and trimmed while maintaining a solid visual line, which is important on long cabinet runs or tall panels. Because the product is from Rehau, Inc. with manufacturer part 327875-142, it provides a defined reference for shops that build multiple jobs using the same Capital Starlit look.
The 1mm thick PVC structure gives this edge banding enough body to respond predictably during trimming, which supports consistent edges across many parts on a production line. That thickness also contributes to a clear transition between the face material and the edge, which matters when aligning the Capital Starlit design with matching surfaces. The 15/16 inch width creates working room on standard panels, so operators can apply the banding without tight tolerance at placement and still trim back to a precise finish. This reduces rework on corners and helps maintain clean lines on cabinet fronts and shelving. The 600 FT length concentrates a large amount of edging in a single product, which helps maintain the same Capital Starlit appearance from part to part over larger projects. In combination, these dimensions and the PVC construction support repeatable edging results in woodworking shops that rely on consistent material behavior.
This Edgebanding, PVC Capital Starlit is 1mm thick, giving a defined edge that trims cleanly and supports a solid profile on cabinet and furniture panels.
The Rehau PVC Capital Starlit edge banding has a 15/16 inch width, providing coverage and trimming allowance for typical panel thicknesses in woodworking applications.
The 600 FT length supplies extended linear footage, supporting multiple cabinets or larger runs while keeping the Capital Starlit appearance consistent within a project.
This Capital Starlit product is Edgebanding, PVC, so the edge is formed from PVC material suited to typical woodworking and surfacing uses.
The 327875-142 Capital Starlit edgebanding is produced by Rehau, Inc., giving shops a specific brand and part reference for repeat ordering.
The 1mm thickness provides enough material for trimming tools to engage smoothly, helping create flush, square edges along cabinet and panel parts.
The Edgebanding, PVC Capital Starlit 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. combines defined thickness, practical width, and extended roll length for edge finishing tasks. For shops sourcing a repeatable Capital Starlit edge under part number 327875-142, this product aligns dimensions and design with woodworking and surfacing workflows handled through Wurth Baer Supply.
Sold In: 1 Roll