Edgebanding PVC Trench Coat 1mm identifies this Rehau, Inc. PVC edge banding as a dedicated solution for finishing exposed panel edges where a Trench Coat color match is required. The 1mm thickness provides a defined edge profile that suits many cabinet and furniture applications. The 43mm width covers typical board thicknesses with room for trim, helping installers work confidently across standard casework dimensions. Being PVC, the material supports common edgebanding fabrication methods in woodworking shops. The 600 FT length per roll gives shops an extended run of the same color and profile, which supports consistent results on multi-cabinet projects. The edge banding format is designed as part of the edgebanding and surfacing workflow, so it fits naturally into established shop processes. This product is categorized as Edge Banding, which positions it for use where raw substrate edges need a finished surface.
This edge banding is identified as 1mm thick, which gives fabricators enough material for trimming while keeping the edge proportionate to typical panel faces. The 43mm width provides coverage that extends past most substrate faces, so installers can band and then trim back to a tight, straight edge. The 600 FT roll length supports uninterrupted runs across multiple cabinets or components, which helps maintain a uniform Trench Coat color appearance throughout a project. The product classification as Edgebanding, PVC keeps it aligned with standard edgebanding equipment and routines in woodworking environments.
This Rehau, Inc. edge banding is identified as PVC, aligning it with applications where a PVC edge finish is specified on casework or furniture components. The Trench Coat designation in the product name defines the intended color tone, which matters when matching edges to corresponding Trench Coat surfaces in a project. The 43mm width allows use on boards that fall within that face dimension range, giving coverage with extra margin for trimming operations. With a 1mm thickness, the banding supports a defined edge on cabinet sides, shelves, or doors, useful when a more substantial edge than thin tape is desired. The 600 FT length supports projects that require repeated use of the same Trench Coat edge, from single runs of cabinets to larger installations where color continuity is important. As an Edge Banding product in the Edgebanding & Surfacing category, it plays a role wherever raw board edges need a PVC finish that coordinates with Trench Coat surfaces.
The stated 1mm thickness helps installers set trimming tools and edgebanders for a consistent edge, which supports repeatable joints and visual alignment across many parts. The 43mm width gives working room to position the band over the substrate before trimming, which reduces the chance of exposed core at the edge. The 600 FT length per roll minimizes stops to change material during production, supporting smoother workflow on repetitive cabinet boxes or door runs. The clear identification through Manufacturer Part # 361987-010 and SAP description "43MMX1MM TRENCH COAT 600FT ABS" provides reliable product tracking, which helps shops reorder the same material and maintain continuity on follow-up jobs. Being categorized as Edgebanding, PVC keeps expectations aligned with PVC edgebanding processes, so settings and handling can be matched to known PVC behavior during fabrication.
This edgebanding is described as 43mm width and 1mm thick, which provides coverage over typical panel edges with material left for trimming to a clean finished edge.
The product description specifies 600 FT, giving shops an extended length for continuous runs and consistent Trench Coat edging across multiple cabinet or furniture parts.
The web description identifies it as PVC edge banding, which aligns it with standard PVC edgebanding processes commonly used in woodworking environments.
The product name and SAP description specify Trench Coat, defining the intended color tone so edges can coordinate with matching Trench Coat surfaces in the project.
The 1mm thick description indicates a substantial edge layer, giving enough material for trimming and sanding while maintaining a defined, consistent edge profile.
The 43mm width provides edge coverage with extra margin, allowing the banding to overhang the substrate and then be trimmed back for a straight finished edge.
The Rehau, Inc. Edgebanding, PVC, Trench Coat 1mm Thick, 43mm Width x 600 FT gives shops a defined combination of material, color name, size, and length tailored to finishing panel edges. The 1mm thickness, 43mm width, and 600 FT roll length support efficient fabrication on projects that specify a Trench Coat PVC edge. Using the Manufacturer Part # 361987-010 and the SAP description, it is straightforward to request this exact PVC edge banding from Wurth Baer Supply when a project calls for a consistent Trench Coat finish across many components.
Sold In: 1 Roll