PVC Biltmore Cherry edgebanding provides a PVC edge treatment in a Biltmore Cherry finish so panel edges match the face material for a consistent project look. The .018 inch thick construction creates a slim edge profile that suits standard casework where a low-build edge is desired. With a 15/16 inch width, this edge banding covers typical 3/4 inch panels while allowing a slight overhang for flush trimming. The 600 FT length is suited to production or multi-cabinet runs, helping keep longer jobs on one continuous coil. As an edge banding in the Edgebanding & Surfacing category, this product is intended for finishing raw panel edges so they are visually finished and ready for installation in cabinetry or furniture projects.
The .018 inch thickness works well where installers want a low-profile edge that finishes flush after trimming without adding noticeable bulk to the panel edge. At 15/16 inch wide, the banding provides enough coverage beyond a 3/4 inch panel, which helps allow slight alignment tolerance during application while still trimming back to a clean line. Because this product is supplied in a 600 FT length, shops can edge multiple cabinets or a full room set from a single roll, supporting consistent color and finish across all matching components.
This edge banding is identified as PVC Biltmore Cherry, so it is suited to projects built around that Biltmore Cherry appearance. In cabinet shops or woodworking environments using cherry-toned Biltmore Cherry panels, the matching edge banding helps carry the same look across exposed edges of shelves, doors, and cabinet sides. As an Edge Banding product in the Edgebanding & Surfacing category, it plays the role of finishing the raw edges of sheet goods so those edges present as part of the overall surface design rather than exposed core. The 15/16 inch width works with common 3/4 inch panel stock used in casework and shelving, allowing the same banding to be applied across various components that share that thickness.
The .018 inch thickness helps the banding sit close to the surface of melamine or laminate panels after trimming, supporting repeatable edge lines from part to part. Because the width is slightly greater than 3/4 inch, operators gain workable tolerance when feeding parts, which helps maintain consistency even when parts vary slightly. With 600 FT on a single product, a shop can complete a series of matching cabinets, closet units, or fixtures using the same coil, which promotes uniform Biltmore Cherry color from one part to the next. The manufacturer part number 716041-170 clearly identifies this exact combination of Biltmore Cherry finish, .018 inch thickness, 15/16 inch width, and 600 FT length, which helps buyers reorder the same edging when repeating a job or expanding an existing installation.
This edge banding is .018 inch thick and 15/16 inch wide, so it covers typical 3/4 inch panels with extra material for trimming to a clean finished edge.
The product length is 600 FT, supporting edging across multiple cabinets or larger runs so color and appearance stay consistent throughout the project.
This product is PVC edge banding, which provides a PVC surface on the panel edge so the edge appearance aligns with PVC-faced panels.
The edge banding is manufactured by Rehau, Inc., so it matches projects that specify Rehau PVC edgebanding in a Biltmore Cherry finish.
The 15/16 inch width covers 3/4 inch panels with extra margin, giving room for slight misalignment and trimming while keeping the core hidden.
Part number 716041-170 identifies this specific Rehau PVC Biltmore Cherry edge banding with .018 inch thickness, 15/16 inch width, and 600 FT length.
This Rehau PVC Biltmore Cherry .018 inch thick, 15/16 inch wide, 600 FT edge banding gives cabinet and woodworking shops a defined option when finishing Biltmore Cherry panel edges. Matching the identified finish, thickness, and width helps keep edging consistent from part to part, while the long 600 FT length supports production runs under a single part number. For projects built around Biltmore Cherry surfaces, this edge banding offers a clearly specified way to carry that same appearance across exposed panel edges.
Sold In: 1 Roll