PVC Sterling Ash edgebanding from Rehau, Inc. is a PVC edge banding designed to finish and protect exposed panel edges in woodworking and cabinet projects. The .018 inch thickness creates a low-profile edge that blends closely with common sheet goods, which supports a consistent finished look across cabinet runs. The 15/16 inch width gives coverage across standard 3/4 inch panels with room to trim flush, helping installers get a clean line without fighting narrow material. The 600 foot roll length supports longer production runs or multiple jobs from a single coil, reducing changeovers during edging work. The Sterling Ash color ties into matching surfacing schemes where that tone is used, helping panels and doors present as a unified assembly. As part of Rehau's PVC edgebanding range, this product is positioned for professional woodworking environments that need repeatable, project-to-project results.
This PVC edgebanding is specified at .018 inch thick, which supports straightforward handling on common edgebanders and manual trimmers by presenting a thin edge that machines easily. The 15/16 inch width gives working clearance around standard furniture and cabinet panels, so the banding can be applied with slight overhang and then trimmed back for a clean final edge. With 600 feet on a roll, shops have a continuous length suitable for edging multiple cabinets, doors, or shelves in the same Sterling Ash finish, supporting consistent results across a full project run. The combination of thickness, width, and roll length helps installers set up once and run panels with less interruption, tying directly into day-to-day production efficiency.
This Rehau PVC edgebanding in Sterling Ash is categorized under Edgebanding & Surfacing and Edge Banding, which places it directly in cabinet, furniture, and general panel finishing work. The 15/16 inch width aligns well with edging for cabinet sides, shelves, and door edges where 3/4 inch material is common, supporting consistent coverage across these components. The Sterling Ash tone works where that specific color is specified in a job, helping doors, drawer fronts, and casework edges align visually with matching surfaces. Because the product is provided as a 600 foot roll, it suits both single larger installations and series production runs that repeat the same color across many parts.
The defined .018 inch thickness, 15/16 inch width, and 600 foot length allow shops to log this edgebanding in cut lists and job standards so operators pull the same material whenever Sterling Ash edges are required. The manufacturer part number 716041-545 specifies this exact size and color, which helps purchasing and production reference the same product without confusion across orders. Being listed as Edgebanding, PVC confirms the PVC material, which is relevant when aligning edgebander settings, trimming operations, and scrap handling with other PVC runs. Together, these details support consistent edging results from job to job, reducing variability when cabinets or panels must match across multiple installations.
The edgebanding is .018 inch thick, 15/16 inch wide, and supplied in a 600 foot length, which suits edging standard 3/4 inch panels with extra for trimming over multiple parts.
The .018 inch thickness creates a thin edge that machines and trims easily, which supports smooth transitions between the banded edge and the panel face after processing.
The 15/16 inch width is suited to panels around 3/4 inch thick, providing full edge coverage with some overhang for flush trimming in cabinet and furniture projects.
The Sterling Ash description identifies the color tone of this PVC edgebanding, which matters when matching the edge treatment to panels and doors specified in the same finish.
The 600 foot roll length provides enough material for multiple cabinets or a full project run, which supports continuous edging without frequent material changes during production.
The Rehau part number 716041-545 identifies this specific PVC Sterling Ash edgebanding in .018 inch thickness, 15/16 inch width, and 600 foot length for accurate ordering and reordering.
This Rehau PVC Sterling Ash .018 inch thick, 15/16 inch wide, 600 foot edgebanding roll ties size, color, and material into a defined standard for panel edges. Using this part number 716041-545, shops can specify the same Sterling Ash edge treatment every time that finish is required. The combination of dimensions and roll length supports practical cabinet and panel runs, helping production stay aligned to the same look across each project. For projects calling for this exact color and format, this edgebanding provides a clearly identified option ready for regular woodworking use.
Sold In: 1 Roll