TRENCH COAT 8MMX51"X120" panel identifies this Rehau, Inc. board as an 8 mm class melamine panel sized for larger cabinet and casework layouts, so one sheet covers more surface before a new cut layout is needed. The SAP description TRENCH COAT 8.15MMX51X120 MDF 2S specifies an MDF core at about 8.15 mm thickness, supporting consistent machining where routers and saws track cleanly across a uniform substrate. The 51 by 120 dimension gives a wide, long format that helps lay out tall panels or multiple fronts from a single sheet, which can streamline cutting diagrams. Being in the Board Panel Products|Melamine category ties this product directly to melamine panel applications, helping align it with cabinet, closet, and similar interior panel projects. The product class Rehau points to a coordinated material line, useful when matching this sheet within the same family on repeat work.
The SAP description listing 8.15MMX51X120 MDF 2S establishes the thickness and format, so installers can base hinge cup depths, groove locations, and edge details on a known nominal 8.15 mm MDF core. The 51 inch width offers ample span for cabinet sides or tall partitions, supporting layouts where a full-height component is taken from one direction without needing to joint multiple pieces. The 120 inch length gives extended run for closet panels or banked cabinet parts, so installers can align vertical and horizontal surfaces from the same sheet. Identifying the product as Board Panel Products|Melamine means the panel is targeted for melamine-style builds, helping align fastener and fitting choices with common melamine practice. The MDF 2S construction supports two-sided installations where both faces remain exposed, such as room dividers or open-shelf interiors.
The Board Panel Products|Melamine category places this sheet directly in the melamine segment, so it suits interior cabinet cases, shelving, and similar panel work where a melamine surface is standard. The 8.15MMX51X120 MDF 2S description shows that both faces are treated, supporting installations where cabinets, partitions, or panels are visible from either side. With a 51 inch width, the panel can serve tall cabinet sides or wardrobe components in one piece, which helps preserve a continuous surface with no horizontal joints. The 120 inch length allows longer closet runs or multiple door blanks to be nested, aiding shops that cut several fronts or panels from a single board. The Rehau product class ties this TRENCH COAT panel into the Rehau line, helpful when matching material across different parts of the same project.
The specified 8.15 mm MDF core gives installers and fabricators a predictable thickness, so hinge cup boring, groove routing, and dado depths can stay consistent across a run of panels. The MDF base described in the SAP text supports uniform density through the sheet, which helps saw blades and router bits track evenly and produce repeatable edges from panel to panel. With 51 by 120 dimensions, cut plans can be standardized for common cabinet and case sizes, simplifying set-up sheets and CNC programs built around this format. The MDF 2S detail means both faces are prepared in the same manner, so drilling patterns and hardware locations can mirror from side to side without treating one face as secondary. The Rehau, Inc. identification and specific part number 336709-012 allow clear reordering, which helps maintain the same panel characteristics on future jobs or add-ons.
The TRENCH COAT 336709-012 is listed under Board Panel Products|Melamine with an MDF 2S description, so it is a melamine-style MDF panel prepared on both faces for panel work.
The SAP description TRENCH COAT 8.15MMX51X120 MDF 2S specifies an approximate 8.15 mm thickness with a 51 inch by 120 inch panel size for larger format layouts.
The 8.15 mm MDF core gives a consistent base for hinge cups, grooves, and dados, so machining setups can stay uniform across multiple sheets of the same panel.
The MDF 2S description indicates both faces are prepared, so the panel suits two-sided uses such as partitions or cabinets visible from inside and outside.
The product lists Rehau, Inc. as the brand and Rehau as the product class, so it is part of the Rehau line of board panel materials.
The 51 inch by 120 inch format provides a large cutting area, so tall cabinet sides or multiple nested parts can be taken from a single sheet to streamline layouts.
The TRENCH COAT 8MMX51"X120" panel from Rehau, Inc. combines an 8.15 mm MDF 2S construction with a 51 by 120 format, giving shops a consistent melamine-style board for cabinet and panel work. The defined dimensions and MDF core support predictable machining, so cut lists, boring patterns, and dados can be based on a stable substrate. For projects built around melamine in this thickness class, choosing this 336709-012 sheet helps align material, layout, and repeat orders under a single identified panel.
Sold In: 1 Sheet