Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica Patine Chalk laminate gives you a Formica Laminate surface in the Patine Chalk 9923-ML design, so you get a coordinated decorative face for interior projects that need a specific pattern look across a run. This sheet is supplied as a 30 inch by 144 inch size, which covers long runs such as counters or work surfaces in one direction without seams along the length. The laminate is identified as Formica 9923-ML Patine Chalk Laminate Postform Grade, so it ties directly to the Formica Corporation design library when matching existing work. The surface uses the Monolith finish, which establishes the texture and visual effect you will see after bonding, helping you plan how it coordinates with other finishes on the job. As a laminate product in Formica Corporation's range, it fits into the Formica HPL category for surfacing work.
This Grade 12 Horizontal Postforming Grade (HGP) laminate is designed for horizontal applications that require forming, so you can plan bends instead of separate edge builds on many counter designs. The Grade 12 designation ties directly to Formica's HGP category, which defines its forming capability on suitable commercial postforming equipment during fabrication. As a postform grade, it serves in interior applications where both decorative appearance and formed edges are needed off the same sheet. The performance as a Formica Laminate surface is tied to proper fabrication practice, which allows the sheet to deliver its intended look across tops, fronts, and returns where bending is part of the layout.
This laminate is described as Grade 12 - Horizontal Postforming Grade (HGP), so it supports horizontal interior applications where forming the laminate around edges creates a continuous decorative surface. It is described for use whenever forming is desired for decorative or functional purposes in interior applications, which positions it well for counters, tops, and similar surfaces where a wrapped edge is preferred. The sheet is postformable to permit bending on suitable commercial postforming equipment, so in a shop equipped for postforming you can shape front edges and coves from the same sheet rather than laminating separate strips. The specified outside radius to 1/2 inch, or 12.7 mm, defines the minimum outside bend the laminate is designed to handle, which gives you a concrete radius target when setting up forms and heaters. A cove radius to 3/16 inch, or 4.8 mm, is also defined, so inside cove details can be planned to those radii when designing backsplashes or similar transitions.
The description states that this Grade 12 laminate is postformable on suitable commercial postforming equipment, so it is intended for controlled heating and forming workflows rather than hand bending. The optimum postforming temperature is 325 F, or 163 C, which gives a specific temperature point to target with your heating system for consistent forming performance across multiple parts in a run. Because both the outside radius to 1/2 inch and cove radius to 3/16 inch are defined, jigs and forms can be built or adjusted to those radii so bending happens within the laminate's described forming envelope. Using a 30 inch by 144 inch sheet size for these formed parts allows long horizontal sections, such as counters or work surfaces, to be laid out and bent from a single sheet lengthwise, which helps maintain pattern flow and alignment. As a Formica Laminate within the Formica HPL category, it fits into established fabrication workflows where high-pressure laminate sheets are bonded and then postformed using commercial equipment.
The Formica Patine Chalk sheet is a Formica 9923-ML Laminate in the Formica HPL category, so it serves as a decorative surfacing layer for interior fabrication work.
This Formica 9923-ML laminate is described as 30 inches by 144 inches, which supports long horizontal layouts such as counters or work surfaces from a single sheet lengthwise.
Grade 12 Horizontal Postforming Grade means the laminate is suited for horizontal interior applications where the sheet is heated and formed to shape decorative or functional edges.
The laminate is described with an outside radius to 1/2 inch, or 12.7 mm, and a cove radius to 3/16 inch, or 4.8 mm, guiding form and jig design.
The laminate has an optimum postforming temperature of 325 F, or 163 C, providing a defined target when setting heaters on commercial postforming equipment.
The Monolith finish defines the surface texture and visual effect, so multiple sheets of this Formica Patine Chalk laminate will share the same finish appearance.
Formica Patine Chalk laminate in the 30 inch by 144 inch format gives you a defined Formica Laminate surface for interior projects that call for the Patine Chalk 9923-ML design. With its Grade 12 Horizontal Postforming Grade rating, outside radius to 1/2 inch, and cove radius to 3/16 inch, it is set up for formed horizontal applications using suitable commercial postforming equipment. The Monolith finish and direct connection to the 2024 Living Impressions Collection support design coordination across jobs that use multiple Formica laminate patterns. For surfacing work where a continuous decorative layer and defined forming behavior matter, this laminate offers a clearly specified option for planning layouts and postforming steps.
Sold In: 1 Sheet
