Formica 9924-ML Patine Stone laminate gives you a stone-look decorative surface in a postformable sheet, so you can detail counters and other interior surfaces with a continuous finish instead of separate edge treatments. This Grade 12 horizontal postforming grade (HGP) laminate is designed for interior applications where forming is desired for decorative or functional purposes, which helps align your design intent with the fabrication method on your commercial postforming equipment. The 48 inch by 144 inch sheet size lets you span longer runs with fewer seams, supporting cleaner layouts across large work areas. The Monolith finish from Formica Corporation provides the specified visual and tactile surface, which helps keep the look consistent with the Patine Stone design across multiple pieces. As part of the 2024 Living Impressions Collection, this pattern works within a coordinated group of Formica laminate looks.
This Formica laminate is specified as postformable to permit bending on suitable commercial postforming equipment, giving shops a defined forming path rather than flat-only fabrication. The Grade 12 horizontal postforming grade (HGP) classification indicates it is intended for formed horizontal applications where both appearance and function depend on controlled heating and bending. With an outside radius to 1/2 inch (12.7 mm), fabricators can run the decorative face over a relatively tight edge, which helps maintain the Patine Stone pattern across the edge profile. The cove radius to 3/16 inch (4.8 mm) supports small inside radii where a back cove or similar detail is needed. An optimum postforming temperature of 325F (163C) gives a clear working point for dialing in heat during production.
This Formica Corporation laminate is identified as Grade 12 horizontal postforming grade (HGP) for interior applications, so it is suited to interior horizontal surfaces where forming is part of the design. Because it is postformable to permit bending on suitable commercial postforming equipment, it fits shops that routinely run postformed tops, counters, or similar components. The ability to achieve an outside radius to 1/2 inch (12.7 mm) means typical front-edge rolls can be executed with the Patine Stone pattern carried right over the edge, which reduces visual breaks in the surface. The cove radius to 3/16 inch (4.8 mm) allows an inside cove transition, useful when an integral backsplash or back cove form is needed on an interior fixture or work surface.
The specified optimum postforming temperature of 325F (163C) gives fabricators a defined target for heat application, which supports more repeatable forming results from run to run. When an HGP laminate is postformed within its rated outside radius of 1/2 inch (12.7 mm), the bending process stays within the laminate's stated performance range, helping maintain the decorative and functional surface through the bend. The cove radius capability to 3/16 inch (4.8 mm) provides similar guidance for inside bends, supporting consistent formation of back coves using standard tooling and profiles. Because this sheet is part of the 2024 Living Impressions Collection, it lets builders and designers align this Patine Stone surface with other Formica laminate patterns from the same collection when planning coordinated interiors.
The Formica 9924-ML Patine Stone laminate is Grade 12 horizontal postforming grade (HGP), which means it is intended for formed horizontal interior surfaces where controlled heating and bending are part of fabrication.
The Patine Stone Monolith finish laminate sheet is 48 inches by 144 inches, which allows fabricators to cover longer interior runs or larger components with fewer seams across the decorative surface.
The Patine Stone laminate is rated for an outside radius to 1/2 inch (12.7 mm), supporting tight front-edge rolls so the decorative surface continues over the edge in a single formed piece.
The Patine Stone horizontal postforming grade laminate is specified for a cove radius to 3/16 inch (4.8 mm), which supports forming small inside coves for backsplashes and similar interior details.
The Formica 9924-ML Patine Stone laminate has an optimum postforming temperature of 325F (163C), giving shops a defined heat target when setting up commercial postforming equipment.
The Patine Stone pattern is part of the 2024 Living Impressions Collection, which offers Formica laminate looks, allowing designers to coordinate this surface with other collection patterns.
The Formica 9924-ML Patine Stone laminate gives fabricators a Grade 12 horizontal postforming grade (HGP) sheet with defined radius and temperature parameters, which supports predictable forming on commercial postforming equipment. The 48 inch by 144 inch size and Monolith finish combine the specified pattern scale and surface texture with coverage suitable for larger interior runs. As part of the 2024 Living Impressions Collection, this Patine Stone design fits into a coordinated group of Formica laminates for interior work. Use this laminate when an HGP-rated, postformable decorative surface is needed for formed horizontal interior applications.
Sold In: 1 Sheet