Fastcap peel and stick PVC edgebanding is a 0.018 inch thick, 15/16 inch wide black PVC edge band supplied on a 600 foot roll, so installers can handle long runs and multiple cabinets without splicing short lengths. The material is made from high quality PVC, which provides a tough edge surface that stands up to everyday cabinet and furniture use where exposed substrates would otherwise show. The peel and stick design uses a high performance pressure sensitive acrylic adhesive on the backing, allowing the banding to be applied directly to prepared edges without separate contact cement. That adhesive increases in strength as it cures, creating a long lasting bond that supports finished edges over time. The black color gives a consistent, dark finished line on matching laminates or painted components where a contrasting edge is not desired.
This Fastcap peel and stick PVC edgebanding uses a high performance pressure sensitive acrylic adhesive on the backing, so installers remove the liner and apply the banding directly to the edge in one step. Because the adhesive increases in strength as it cures, the bond continues to develop after application, which helps keep edges tight during regular use. The 15/16 inch width is suited to typical 3/4 inch panel edges, allowing installers to center the band, apply pressure along the length, and then trim excess for a flush finish. The 600 foot roll format supports a continuous application workflow on a bench or onsite, which is useful when banding multiple shelves, cabinet sides, or filler strips in sequence.
This Fastcap PVC edgebanding is described as good for field repairs, so installers can address damaged or unfinished edges on existing cabinets and panels using the same roll they rely on in the shop. The banding is also suited for inside and outside radii, meaning it can follow curved or rounded edges where straight segments or rigid trims would be difficult to use, supporting design details such as arched cabinet components. The product is noted as useful as scribe tape, so it can serve in situations where a narrow, workable edge strip is needed to bridge small gaps at walls or fillers. With high quality PVC construction and a black finish, the edgebanding supports these varied tasks while keeping the visible edge consistent with darker components throughout the project.
The high performance pressure sensitive acrylic adhesive on this tape style edgebanding provides immediate tack on application, which anchors the band while the rest of the edge is set, helping reduce slip during trimming. As the adhesive increases in strength as it cures, the connection between the PVC and the substrate becomes more secure over time, which is important in areas such as door edges or shelf fronts that see ongoing contact. The 0.018 inch thickness keeps the profile manageable during trimming and finishing, allowing cutters or end tools to track along the edge without removing excessive material. The 15/16 inch width pairing with common 3/4 inch stock gives installers a repeatable reference for centering and trimming, which supports consistent reveal and reduces rework on matching cabinet runs.
This Fastcap peel and stick PVC edgebanding is 0.018 inch thick, 15/16 inch wide, and supplied on a 600 foot roll, giving enough length and coverage for extended cabinet and furniture edge work.
The edgebanding uses a high performance pressure sensitive acrylic adhesive on its backing that increases in strength as it cures, creating a long lasting bond along cabinet and panel edges.
This black PVC edgebanding is described as good for field repairs, inside and outside radii, scribe tape, and many other applications where a dark, finished edge is needed on exposed components.
The 15/16 inch width works well with typical 3/4 inch panels, giving slight overhang for trimming so installers can bring the PVC edge flush with the panel faces.
The 0.018 inch thickness keeps the edgebanding relatively thin, which supports smooth trimming and helps the finished edge sit close to the panel surface without a bulky transition.
The manufacturer part number for this Fastcap peel and stick PVC edgebanding is FE.SP.15/16-600.BL, which identifies the black, 15/16 inch by 600 foot roll.
The FastEdge PVC 15/16 x 600 black PSA roll combines high quality PVC with a pressure sensitive acrylic adhesive backing, giving installers a practical peel and stick option for cabinet and furniture edges. The 600 foot length supports both shop production runs and field repair work from the same roll, while the 0.018 inch thickness and 15/16 inch width align with common 3/4 inch panel construction. For projects needing black edges, inside and outside radius capability, and scribe tape style applications, this Fastcap peel and stick PVC edgebanding offers a single material that fits those tasks and keeps the workflow straightforward.
Sold In: 1 Roll