Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The US Futaba DynaSlide 10 inch full-extension ball-bearing drawer slide is a side-mount slide built from stainless steel with a zinc finish, rated 100 lb per pair, and fitted with a hold-in detent to keep the drawer firmly closed until intentionally pulled. At 10 inches it is one of the shortest lengths in the DynaSlide program, making it the right tool for shallow drawers and tight cabinet runs where a longer slide simply will not fit.
A 10 inch slide fits the shallow drawers that full-size slides cannot reach: small shop cabinets, tool-box drawers, narrow base units, and utility inserts with limited front-to-back depth. At 100 lb per pair, the DynaSlide carries a meaningfully loaded drawer in these compact applications without dropping to a light-duty class. The hold-in feature adds practical value in shop and mobile settings where a loaded shallow drawer needs to stay put between uses rather than drifting open from vibration or an accidental bump. Full extension matters even at 10 inches: the whole interior comes out to the face, so nothing is trapped behind the cabinet opening in a short-depth box.
The slide members are stainless steel finished in zinc, a pairing that puts inherent corrosion resistance into the base material and adds a uniform zinc surface for installation environments that see moisture, humidity, or periodic cleaning. This is an indoor slide; for true washdown or marine service, confirm that the stainless grade and zinc finish meet your application's requirements before specifying. The ball-bearing mechanism runs steel balls in formed raceways, keeping movement precise and consistent across the rated load range. The non-handed steel members are interchangeable side to side, which reduces part-number management on larger orders.
Cabinet shops and millworkers building shallow-depth units reach for the 10 inch DynaSlide when the interior cabinet depth rules out anything longer. Contractors fitting out compact utility cabinets, small base units, or drawer inserts in tight spaces get a 100 lb rated slide in a length that otherwise tends to drop to lighter-duty options. The hold-in detent also suits trade and shop applications where drawers in rolling carts or portable cabinets need to stay closed on the move. If the drawer depth and cabinet layout permit a longer slide, other lengths in the DynaSlide program offer the same construction at greater nominal lengths.
Per pair — that is the standard basis for drawer slide load ratings across the industry. One pair of DynaSlide 10 inch slides is rated 100 lb together.
The hold-in is a mechanical detent, not a lock. It catches the drawer at the closed position and resists drift or bounce-back, but a normal pull releases it immediately. If you need the drawer to stay locked closed against deliberate opening, you need a lock-in slide, not a hold-in.
Side clearance for the DynaSlide series is not confirmed in the available product data. Standard side-mount ball-bearing slides typically require 1/2 inch per side, but verify the DynaSlide specification sheet before sizing your drawer box.
No. The motion is hold-in only — a detent at the closed position, with no damper. The drawer does not self-close or soft-close; it stays where it is left until pulled or pushed.
Confirm the sold-as unit on the product page before ordering. Drawer slides in this catalog are commonly sold per pair, but verify the unit shown at checkout to ensure you receive the quantity needed for a complete drawer installation.
When the cabinet depth is short and the load is real, the DynaSlide 10 inch delivers full extension and a 100 lb per pair rating in a length that fits where longer slides cannot go — with a hold-in detent to keep the closed drawer exactly where you left it.
Sold In: 1 Set
