Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the steel back fixing bracket for Blum's MERIVOBOX drawer system, sized for E-height side profiles at 209mm and finished in Indium Gray Matte. It secures the rear of the MERIVOBOX runner to the cabinet interior, completing the structural connection that keeps the system aligned under load. The bracket ships with both left-hand and right-hand orientation, so one order covers a single drawer position.
In a MERIVOBOX installation, the rear bracket is the connection point between the runner and the cabinet back panel. Without it, the rear of the slide has no fixed reference, and the drawer will rack or drop out of alignment as it cycles. The E-height bracket positions the runner at the elevation the E-height side profile requires — 209mm — so the bottom of the drawer box sits at the right height relative to the cabinet opening. This matters most in production environments where drawers are built to a repeating spec: the bracket locks in a consistent rear elevation across every carcass without shimming or guesswork.
The bracket suits face-frame and frameless cabinet construction wherever the runner reaches the back panel. In deeper cabinets or where the runner span requires rear support, this bracket is the component that makes the rear mounting point possible.
The bracket is formed from steel, the same structural material used throughout MERIVOBOX's running gear. Indium Gray Matte is one of the interior color programs Blum offers for MERIVOBOX, a cooler, darker gray that reads as a quiet neutral against most drawer box finishes. Specifying matching brackets keeps the interior looking intentional rather than assembled from mismatched parts — particularly relevant in open-front or glass-front cabinetry where the interior is visible when the drawer is closed.
Cabinet shops building MERIVOBOX drawers in the Indium Gray Matte color program will need this bracket wherever a drawer runner reaches the cabinet back. It is also the bracket to reach for when replacing a damaged rear mount in an existing MERIVOBOX installation — the finish match keeps the repair invisible. Designers specifying MERIVOBOX for a handleless kitchen where interior hardware color is part of the design language will want to confirm the bracket finish matches the rest of the system components ordered for that project.
Yes. The bracket covers both left-hand and right-hand orientation, so one unit handles one complete drawer position — you do not need to order a separate mirrored part.
This bracket is sized for the E-height profile at 209mm. MERIVOBOX rear brackets are height-specific, so using this bracket with a different side height will misalign the runner. Order the bracket that matches the side profile height you are building with.
No. Blum rear brackets are platform-specific. This bracket is made for MERIVOBOX and will not fit LEGRABOX or TANDEMBOX runners. Each Blum drawer system uses its own rear mounting hardware.
Yes, wherever the runner extends to the cabinet back panel. The bracket mounts to the back of the cabinet, so face-frame construction does not affect its function as long as the runner reaches the back mounting point.
Specifying the correct rear bracket for the height and color program you are building keeps the MERIVOBOX system performing the way it was engineered to — with every runner set at the right elevation, every finish matched, and no field improvisation at the back of the cabinet.
Sold In: 25 Set
