Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maple cutlery tray insert is a practical way to organize standard cutlery inside a kitchen drawer. The Rev-A-Shelf cutlery tray in the 4WCT Series is a wood drawer insert made of maple hardwood and designed to drop into 15 inch wide and 21 inch wide base drawers. This drop-in cutlery tray measures 16-3/16 inches wide, 19-1/2 inches deep, and 2-3/8 inches high, making it a shallow option for drawers that need a lower profile insert. As a kitchen drawer organizer, this base drawer cutlery tray helps separate utensils without requiring a built-in assembly. The product is sold as each and is intended for standard cutlery use in compatible drawer openings.
Key specs to confirm: This maple cutlery tray insert is listed at 16-3/16 inches wide, 19-1/2 inches deep, and 2-3/8 inches high. Rev-A-Shelf states that this wood drawer insert is designed to drop into 15 inch wide and 21 inch wide base drawers for use with standard cutlery. Before purchase, confirm your actual inside drawer opening, usable depth, and side clearance so the tray can sit flat and operate without interference. If you need details beyond the listed size, including exact compartment layout or any finish details, those should be confirmed with the manufacturer or technical documentation. Safety, load, and compliance details are not provided and should be confirmed if required for your project.
What's included: One Rev-A-Shelf 4WCT Series maple cutlery tray insert, sold as each. No other components are verified in the product data.
What to verify before ordering: Check drawer interior width, usable depth, and available height. Confirm that your drawer is a compatible base drawer application and that a shallow 2-3/8 inch tray height fits your drawer setup. Verify that your cutlery storage needs match a standard cutlery insert format.
Buyers usually choose a drawer insert for cutlery when a wide drawer becomes cluttered with loose forks, spoons, and serving pieces. A dedicated tray helps separate those items into a fixed layout, which makes daily use easier and keeps the drawer from becoming a catch-all space. This Rev-A-Shelf cutlery tray is built for that kind of task. It is a maple hardwood tray designed to drop into a compatible drawer rather than requiring a fully custom organizer build.
For cabinet shops, installers, and serious DIY buyers, the main advantage is predictable sizing. The product data gives a clear set of drawer insert dimensions: 16-3/16 inches wide, 19-1/2 inches deep, and 2-3/8 inches high. That makes it easier to compare the insert against the actual interior of the drawer before ordering. It is also identified for 15 inch wide and 21 inch wide base drawers, which gives buyers a starting point for fit. Because drawer construction can vary, the inside opening should still be measured directly rather than assumed from the cabinet label alone.
This drop-in cutlery tray can be useful in remodel work where the goal is to improve drawer organization without redesigning the cabinet box. It can also fit new cabinet projects where the buyer wants a wood drawer insert that matches a maple cabinet interior or a natural wood accessory package. Since the tray is described for standard cutlery use, it is best suited to common utensil storage rather than specialty tools or oversized serving items unless the compartment layout is confirmed separately. If your drawer has side hardware, unusual joinery, or reduced interior height, confirm those conditions before purchase.
When comparing a wood drawer insert, most buyers focus on material, dimensions, installation style, and intended use. This Rev-A-Shelf cutlery tray gives verified information in each of those areas. The material is maple hardwood. The installation style is drop-in. The intended use is standard cutlery. The listed dimensions provide a direct way to check fit in a base drawer application.
That matters because many ordering mistakes happen when buyers rely on nominal cabinet width instead of true interior drawer space. A product made for a 15 inch wide or 21 inch wide base drawer still needs enough usable room inside the drawer box for the insert width and depth. A shallow tray height of 2-3/8 inches can also be an advantage where vertical clearance is tight, but it should be checked against the drawer interior and any items stored above or around it.
Another practical factor is installation effort. A drop-in kitchen drawer organizer is often simpler to plan for than a built-in organizer that may need trimming or permanent fastening. This product is sold as each, which helps when ordering for one drawer at a time or specifying inserts only where they are needed. Buyers who need an exact compartment count, finish detail, or confirmation of use with nonstandard drawer hardware should verify those points before ordering, since those details are not included in the verified product data.
The Rev-A-Shelf cutlery tray is designed for 15 inch wide base drawers, but actual inside drawer dimensions should be measured before ordering.
This drawer insert for cutlery is designed to drop into 21 inch wide base drawers when the interior dimensions allow proper fit.
This maple drawer insert measures 16-3/16 inches wide, 19-1/2 inches deep, and 2-3/8 inches high.
This Rev-A-Shelf wood drawer insert is the shallow height option at 2-3/8 inches high.
This drop-in cutlery tray is described as designed to drop into compatible drawers. Follow manufacturer installation guidance and local building requirements where applicable.
This kitchen drawer organizer is made from maple hardwood.
The verified product data identifies one maple cutlery tray insert sold as each. Additional included items are not specified.
This wood drawer insert is designed for standard cutlery use. Oversized utensil fit should be confirmed before ordering.
This base drawer cutlery tray requires checking inside drawer width, usable depth, and available height against the listed tray dimensions.
Maple drawer insert works best when the drawer opening, depth, and height are confirmed before purchase. This Rev-A-Shelf 4WCT Series tray is a maple hardwood cutlery insert sold as each and designed to drop into compatible 15 inch wide and 21 inch wide base drawers for standard cutlery use. Before ordering, verify the 16-3/16 inch width, 19-1/2 inch depth, and 2-3/8 inch height against your actual drawer interior. That quick check helps ensure the tray fits the drawer and the way you plan to organize utensils.
Sold In: 1 Pallet
