Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf drying rack drawer gives a base cabinet a dedicated place to dry dishes and kitchen items inside the cabinet footprint. This wood drawer system from Rev-A-Shelf is built from fully assembled maple with a clear coat finish and uses soft-close full extension slides for smooth access. The cabinet drying rack drawer is designed for a 30 inch base cabinet with a 27 inch opening, and it uses adjustable door-mount brackets that are included and required for operation. Seventeen rust-resistant stainless steel drying rods support everyday drying tasks, while the patent-pending rack offers two positions of placement. When opened, the unit requires 48 inches of clearance, so cabinet location and aisle space should be checked before ordering.
Key specs to confirm: This base cabinet drying rack is designed for a 30 inch base cabinet with a 27 inch opening. The assembled unit fits into existing cabinet drawer space and attaches to the existing cabinet door, so door condition, drawer opening size, and interior cabinet layout should all be checked. The product requires 48 inches of clearance when opened, which matters in tight aisles or island runs. Buyers should also confirm that the cabinet can accept the included adjustable door-mount brackets and that the desired rack position works with nearby plumbing, shelves, or other obstructions. Load details, compliance information, and any unlisted dimensional tolerances should be confirmed with the manufacturer or technical documentation.
What's included: A fully assembled maple drying rack drawer, soft-close full extension slides, 17 rust-resistant stainless steel rods, and adjustable door-mount brackets that are included and required for operation.
What to verify before ordering: Confirm the cabinet is a 30 inch base cabinet, verify a 27 inch opening, check for 48 inches of open clearance, confirm the existing cabinet door can be used for attachment, and review any site conditions that could interfere with drawer travel or rack placement.
A door mount drying rack is useful when a buyer wants drying space inside the cabinet instead of on the countertop. In a kitchen where visible dish racks create clutter, this product type moves the task into a base cabinet while still keeping access simple. The Rev-A-Shelf drying rack drawer is made for that kind of use. It fits into existing cabinet drawer space and attaches to the existing cabinet door, so the drawer and door work together during opening and closing.
For installers, the fit details are the first checkpoint. This unit is designed for a 30 inch base cabinet with a 27 inch opening. That makes opening width a critical measurement before ordering. Buyers should also account for the verified 48 inches of clearance when opened. In narrow walkways or near islands, that clearance can determine whether the location is practical.
For daily use, the product combines a fully assembled maple wood drawer system with 17 rust-resistant stainless steel drying rods. The wood construction arrives assembled, which can reduce prep time at installation. The stainless steel drying rods provide the actual drying surface and are intended for repeated wet use. The patent-pending rack has two positions of placement, which gives some flexibility in how the rack is set within the drawer. If the cabinet interior has nearby obstructions, buyers should confirm which of the two positions will work best.
The soft-close drying rack drawer also uses full extension slides. Full extension slides help the user reach the entire drying area rather than only the front section. Soft-close action helps control drawer movement when closing. Because adjustable door-mount brackets are included and required for operation, this is not a drawer-only application. The cabinet door must be part of the installation plan. Follow manufacturer installation guidance and local building requirements where applicable.
When buyers compare a cabinet drying rack drawer to more basic rack setups, the practical differences usually come down to access, fit, and installation method. A standard loose rack may not use the cabinet opening in a controlled way. This Rev-A-Shelf drying rack drawer is designed as a wood drawer system with soft-close full extension slides, a defined cabinet size target, and included door-mount hardware. Those verified details help buyers plan around a known application instead of adapting a general storage product.
Material choice also matters in a wet-use area. This product combines maple construction with a clear coat finish and rust-resistant stainless steel rods. That mix gives buyers a wood drawer structure and a metal drying surface in the same unit. The product description verifies 17 rods, which is a concrete feature buyers can compare when reviewing capacity style, though any exact item capacity should be confirmed from technical documentation rather than assumed.
Another point of comparison is installation readiness. This unit is fully assembled and includes adjustable door-mount brackets that are required for operation. That gives installers a clearer starting point than products that require separate sourcing of mounting pieces. The rack also offers two positions of placement, which can help when cabinet interiors vary. Still, buyers should not assume every 30 inch cabinet will accept the unit without review. The 27 inch opening requirement, existing door attachment, and 48 inch open clearance all need to be checked in the actual jobsite conditions.
For buyers who want a base cabinet drying rack that stays integrated with the cabinet front, the verified fit criteria and included components are the main reasons to focus on this product type. The value is not in broad claims. It is in matching the cabinet opening, door mounting method, and clearance requirements to the planned installation.
This Rev-A-Shelf drying rack drawer is designed for a 30 inch base cabinet with a 27 inch opening, so both cabinet type and opening size must be confirmed.
This door mount drying rack uses adjustable door-mount brackets that are included and required for operation.
This Rev-A-Shelf drying rack drawer requires 48 inches of clearance when opened.
This maple drying rack drawer is built from fully assembled maple wood with a clear coat finish.
This soft-close drying rack drawer uses soft-close full extension slides.
This cabinet drying rack drawer includes 17 rust-resistant stainless steel rods.
This Rev-A-Shelf drying rack drawer has a patent-pending rack with two positions of placement.
This base cabinet drying rack fits into existing cabinet drawer space and attaches to the existing cabinet door.
This drying rack drawer requires a 30 inch base cabinet, a 27 inch opening, usable door attachment, and 48 inches of open clearance. Follow manufacturer installation guidance and local building requirements where applicable.
Maple drying rack drawer buyers should focus on fit first, then installation method. This Rev-A-Shelf unit includes the assembled maple drawer, soft-close full extension slides, 17 stainless steel drying rods, and adjustable door-mount brackets required for operation. Before purchase, confirm the cabinet is a 30 inch base cabinet with a 27 inch opening and make sure the location has 48 inches of clearance when opened. Checking those verified points helps you match the product to the cabinet and avoid ordering issues.
Sold In: 1 Each
