Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
blind corner organizer from Rev-A-Shelf is a wood blind corner pull-out kit built to improve access inside blind corner cabinets. The Rev-A-Shelf Girasolo 2-Tier Blind Corner Kit is designed for a 12 inch opening and uses a left hand configuration. This soft-close blind corner organizer uses a mounted telescopic post system with a soft-close pivot hardware system, helping the shelves move with controlled action. The product is made for 39 inch and 42 inch blind corner cabinet applications with a 12 inch opening. Its maple shelf construction includes a 5/8 inch thick natural maple shelf bottom and a 1-5/8 inch solid wood frame with a finger joint rim. Buyers planning blind corner storage upgrades should confirm cabinet opening, hand orientation, and mounting method before ordering.
Key specs to confirm: This Girasolo blind corner kit is designed for 39 inch and 42 inch blind corner cabinets with a 12 inch opening, and this version is the left hand model. Buyers should confirm the cabinet opening width, cabinet type, and the left hand door orientation before purchase. The product uses a mounted telescopic post system and can mount to the cabinet floor, side, or top depending on the application, so the cabinet interior must support the intended install method. The shelf construction is verified as 5/8 inch natural maple with a 1-5/8 inch solid wood frame. Load rating, clearance requirements, and any compliance details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified included elements are a Rev-A-Shelf Girasolo 2-tier wood blind corner kit with adjustable shelves, a mounted telescopic post system, and soft-close pivot hardware. Additional hardware details should be confirmed before ordering.
What to verify before ordering: Confirm 39 inch or 42 inch blind corner cabinet fit, a 12 inch opening, left hand configuration, interior obstructions, and whether your cabinet application calls for floor, side, or top mounting. Check door swing and available interior clearance before installation.
A blind corner cabinet often leaves a large section of storage hard to reach. A blind corner organizer is used when a buyer wants better access to items that would otherwise sit behind the cabinet face and remain difficult to retrieve. This Rev-A-Shelf blind corner kit is built for that specific use case. It is a 2-tier wood organizer designed for blind corner cabinets that have a 12 inch opening and fall within the verified 39 inch or 42 inch cabinet application range.
For a kitchen remodel, this left hand blind corner kit can make more of the hidden corner area usable while keeping stored items on defined trays instead of loose on the cabinet floor. Adjustable shelves help buyers set the tray position around the items they plan to store. The mounted telescopic post system and soft-close pivot hardware system are relevant for buyers who want a blind corner pull-out with controlled shelf movement rather than a fixed shelf layout.
Professional installers may also look at the mounting flexibility first. This blind corner cabinet organizer can mount to the cabinet floor, side, or top depending on the application. That matters when cabinet construction, access, or interior layout makes one mounting location more practical than another. Before ordering, buyers should confirm which mounting approach matches the cabinet they are working on. If the cabinet has interior obstacles, unusual framing, or door hardware that affects travel path, that should be checked against manufacturer guidance.
Material is another practical factor. This maple blind corner organizer uses a 5/8 inch thick natural maple shelf bottom and a 1-5/8 inch solid wood frame with a finger joint rim. Buyers who prefer wood cabinet accessories often choose this type of construction to coordinate with wood interiors and to keep the shelf edge clearly defined. If exact tray dimensions, weight limits, or required clearances are critical for the project, those details should be confirmed before installation.
When buyers compare a blind corner pull-out, the first question is usually fit, not appearance. This Girasolo blind corner kit gives several verified fit points: it is for a 12 inch opening, it is the left hand version, and it is designed for 39 inch and 42 inch blind corner cabinets. Those facts help narrow compatibility faster than broad category shopping alone. A buyer can use those details to decide whether this specific organizer belongs on the short list.
Another comparison point is how the organizer is built and installed. Some blind corner storage products rely on a single mounting style, while this Rev-A-Shelf blind corner kit is described as mounting to the cabinet floor, side, or top depending on the application. That gives installers more than one approved mounting position to evaluate, though the correct method still needs to be matched to the cabinet construction. The adjustable shelves also matter because shelf position can affect practical storage use after installation.
Motion hardware is also worth reviewing. This product uses a soft-close pivot hardware system, which is a specific verified feature and can be useful for buyers who want smoother operation in a busy kitchen. The wood tray construction is another clear differentiator for buyers who want a maple blind corner organizer rather than a wire format. Because exact clearance and load data are not verified here, careful buyers should compare those points in the technical documentation before placing the order.
This blind corner organizer is designed for 39 inch and 42 inch blind corner cabinets with a 12 inch opening. Buyers should confirm cabinet dimensions and interior clearance before ordering.
This Rev-A-Shelf blind corner kit is the left hand version. Buyers should match hand orientation to the cabinet layout and door setup.
This Girasolo blind corner kit is designed for a 12 inch opening. Confirm the clear opening at the cabinet before purchase.
This blind corner pull-out can mount to the cabinet floor, side, or top depending on the application. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf blind corner organizer has adjustable shelves. Shelf position should still be checked against cabinet clearance and stored item height.
This maple blind corner organizer has a 5/8 inch thick natural maple shelf bottom and a 1-5/8 inch solid wood frame with a finger joint rim.
This blind corner cabinet organizer uses a soft-close pivot hardware system. That feature is part of the verified product description.
This left hand blind corner kit requires confirmation of cabinet size, 12 inch opening, hand orientation, mounting location, and interior obstructions before installation planning.
Rev-A-Shelf blind corner kit is a fit-driven purchase, so verify the cabinet size, 12 inch opening, and left hand orientation before you buy. This product includes a 2-tier wood blind corner organizer with adjustable shelves, a mounted telescopic post system, and soft-close pivot hardware. The organizer is designed for 39 inch and 42 inch blind corner cabinets and may mount to the floor, side, or top depending on the application. Confirm cabinet clearance, mounting method, and any unlisted technical details with manufacturer documentation before finalizing the order.
A maple blind corner organizer like this Rev-A-Shelf Girasolo model is intended for buyers who want wood trays, adjustable shelves, and soft-close motion in a blind corner cabinet. It is important to confirm fit details first, especially cabinet size, opening width, and hand orientation. The verified construction and mounting options help narrow the choice, but final compatibility depends on your cabinet layout and install conditions.
Sold In: 1 Each
