
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Maple utensil tray insert gives a defined storage area for kitchen utensils inside a drawer. This Rev-A-Shelf utensil tray insert is a drawer insert made from maple and sized at 10-1/4 inches wide, 19-1/2 inches deep, and 2-3/8 inches high. Buyers looking for a kitchen drawer organizer or drawer organizer insert often need a simple way to separate utensils without changing the cabinet itself. The Rev-A-Shelf 4WUT Series tray is built for drawer organization and fits buyers who want a maple drawer insert with a clear size reference before ordering. Because this is a cabinet drawer insert with specific dimensions, the main buying step is confirming your drawer's inside width, depth, and height before purchase.
Key specs to confirm: This Rev-A-Shelf drawer tray insert is listed at 10-1/4 inches wide, 19-1/2 inches deep, and 2-3/8 inches high. For a utensil tray, those three measurements are the main fit checkpoints. Measure the usable inside drawer width, inside depth, and inside height, then compare them to the tray size. Also confirm whether your drawer hardware, box construction, or interior obstructions reduce usable space. If you need details beyond the listed dimensions, such as exact compartment layout, mounting method, or finish specifics, those should be confirmed with the manufacturer or technical documentation. Any safety, load, or compliance details are not provided here and should also be confirmed if relevant to your project.
What's included: Verified data identifies a Rev-A-Shelf 4WUT Series maple utensil tray insert. Additional included items are not specified and should be confirmed before ordering.
What to verify before ordering: Confirm your drawer's interior measurements, check that the tray height clears the drawer opening and any contents above it, verify the intended right-fit application if that matters in your layout, and match the manufacturer part number to your purchasing list.
A kitchen drawer organizer is usually purchased to fix one practical problem: loose utensils sliding around in a drawer. A maple utensil tray insert addresses that by giving the drawer a defined storage format inside the cabinet. For installers, remodelers, and serious DIY buyers, the key advantage is that this product is already identified as a drawer insert rather than a loose countertop organizer or a generic bin. That means the purchase decision centers on fit and intended drawer use.
This Rev-A-Shelf utensil tray insert works well when a buyer already knows the drawer's usable interior size and wants a wood tray with a specific footprint. The listed dimensions of 10-1/4 inches wide, 19-1/2 inches deep, and 2-3/8 inches high are useful for replacement planning, cabinet upgrades, and new drawer organization layouts. In many kitchens, one drawer is dedicated to serving pieces, prep tools, or everyday utensils. A drawer organizer insert like this helps divide that space more deliberately than storing tools loose in the drawer box.
Another common scenario is matching a kitchen utensil organizer to a wood cabinet interior. Because this is a maple drawer insert from Rev-A-Shelf, buyers who prefer a wood accessory instead of plastic can compare dimensions first and then confirm visual fit with the rest of the cabinetry. For trade buyers ordering for a jobsite, the manufacturer part number is also important because it reduces ordering confusion when multiple drawer sizes are being planned.
If you are replacing an older cabinet drawer insert, confirm more than the nominal drawer size. Measure inside the drawer box after slides, fasteners, or corner joints are considered. If your drawer has interior hardware, a shallow front, or unusual side construction, verify that the 2-3/8 inch tray height and 19-1/2 inch tray depth will still fit as intended. If you need exact compartment details or installation instructions, those are not provided in the verified product data and should be checked before purchase.
When comparing one drawer insert to another, the most useful factors are material, product type, and exact size. This product is clearly identified as a Rev-A-Shelf maple utensil tray insert in the 4WUT Series, so buyers can evaluate it as a wood drawer tray insert with known overall dimensions. That is often more helpful than broad marketing claims because drawer organization products succeed or fail on fit.
Some tray options are chosen mainly for low cost or flexible use, while others are chosen because the buyer wants a dedicated cabinet drawer insert with a wood appearance. This Rev-A-Shelf utensil tray insert gives you a fixed size to measure against and a defined product identity for procurement. For installers, that supports cleaner specification and easier reorder control. For homeowners, it means the main decision is straightforward: does the drawer accept a 10-1/4 inch by 19-1/2 inch by 2-3/8 inch tray, and does a maple utensil tray match the project?
Generic organizers can be harder to compare if dimensions are vague or if the product type is not clearly stated. Here, the product is identified as a drawer insert and utensil tray insert, which helps set proper expectations. It is intended for drawer organization, not for wall mounting, countertop storage, or powered accessories. If your project requires exact compartment counts, hardware, or installation components, verify those details before ordering. Using the part number and the listed dimensions is the safest way to confirm that this tray matches the drawer and the job scope.
This Rev-A-Shelf utensil tray insert fits only drawers with enough usable inside space for 10-1/4 inch width, 19-1/2 inch depth, and 2-3/8 inch height.
This drawer insert is listed at 10-1/4 inches wide, 19-1/2 inches deep, and 2-3/8 inches high.
This Rev-A-Shelf kitchen drawer organizer is made from maple.
This utensil tray should be matched to the usable inside drawer dimensions, not the outside cabinet size.
This drawer tray insert height matters because the drawer must clear 2-3/8 inches and any interior obstructions.
This product is classified as a drawer insert for kitchen and bath cabinet accessory use.
This listing verifies a Rev-A-Shelf maple utensil tray insert. Additional included items should be confirmed before ordering.
This drawer organizer insert can work as a replacement if the existing drawer accepts the same overall dimensions and intended tray orientation.
This product data does not include installation instructions or compliance details. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf utensil tray insert is a practical choice when you need a defined drawer insert size and a maple construction for kitchen organization. Before purchase, confirm the 10-1/4 inch width, 19-1/2 inch depth, and 2-3/8 inch height against the usable inside drawer space. The verified listing identifies the tray itself, while other included components should be confirmed. Matching the dimensions and manufacturer part number before ordering is the safest way to avoid fit issues and keep your cabinet drawer insert plan on track.
Sold In: 1 Pallet