Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Rev-A-Shelf 4PIL pilaster system gives base and wall cabinets a continuous shelf-support track in natural maple, running 54-7/16 inches tall and 1-1/8 inches wide so it blends into wood interiors rather than standing out against them.
Pilaster strips are the foundation of adjustable shelving inside a cabinet. Instead of fixed shelf pins drilled at a set height, a pilaster track accepts brackets at any position along its length, so shelf heights can shift as storage needs change. This matters most in a tall base cabinet used for pantry goods, in a utility cabinet holding items of varying heights, or in any interior where the original fixed shelves no longer serve the load. The 54-7/16 inch height makes this pilaster a natural fit for a standard base cabinet running from the floor to the top rail, where a shorter strip would leave the upper section without support options.
Natural maple is the material here, which means the strip carries the warm, light grain tone of unfinished maple. In a cabinet built from maple or a maple veneer, the pilaster disappears visually into the side wall rather than drawing attention. For painted interiors or metal-finished organizer systems, the 4PIL series also offers metal versions in nickel and other finishes. The 1-1/8 inch width profiles are sized to sit flush or surface-mount against the cabinet wall without significantly reducing the usable interior depth. Because the system is non-handed, a single part number covers both sides of a cabinet, simplifying what you need to stock or order.
Cabinet shops building custom wood interiors reach for the maple version when the client's cabinet material is visible-grade wood and the interior needs to match. Designers specifying adjustable shelving in a natural wood kitchen or butler's pantry will find this track integrates without a finish mismatch. Contractors retrofitting adjustable shelves into an existing wood cabinet can install this strip without painting or finishing if the cabinet interior is already natural maple. Homeowners doing a targeted renovation can also use this to convert a fixed-shelf cabinet into an adjustable one. Compatible 4PIL brackets are sold separately and slot into the pilaster at any position along the track.
No. This listing is for the pilaster strip itself. Compatible 4PIL series brackets are sold separately and slot into the track at any position.
It is natural maple, meaning it carries the raw maple tone. If the cabinet interior is already finished maple, the strip may blend in as-is. If a stain or topcoat match is needed, it can be finished before installation.
The strip is non-handed, so the same part works on the left or right side. Cabinets with two pilaster tracks typically use two of the same part number.
At 54-7/16 inches tall, it is sized for a full-height base cabinet run. Confirm your cabinet's interior height before ordering to make sure the strip fits without trimming.
Choose the maple 4PIL pilaster when the cabinet interior is wood and the shelf system needs to adapt over time, with a finish that integrates rather than interrupts.
Sold In: 1 Set