Rev-A-Shelf RV Series 27 quart Black Trash Bins Lids, 11-1/4"W x 2-1/4"H x 15-1/4"D - RV-1024-LID-18-1
Description
Choose a Rev-A-Shelf trash bin lid
Rev-A-Shelf trash bin lid is a replacement lid designed for Rev-A-Shelf's 27 qt. waste container. This 27 quart trash bin lid is black and sized for buyers who need a matching waste container lid for an existing cabinet waste system. Rev-A-Shelf lists this lid at 11-1/4 in. wide, 2-1/4 in. high, and 15-1/4 in. deep, which gives installers a clear starting point when checking trash bin lid dimensions before ordering. As part of the RV Series trash bin lid line, it is sold per each and fits the replacement-parts need for damaged, missing, or worn lids. If you already use a Rev-A-Shelf bin setup, this cabinet trash bin lid helps restore covered waste storage without replacing the full container assembly.
See practical gains from this replacement trash bin lid
- Designed for Rev-A-Shelf 27 qt. waste containers - Helps buyers target a lid made for the matching container size instead of guessing across different bin capacities.
- Black finish - Helps maintain a consistent look when replacing a worn or missing lid in an existing waste container setup.
- 11-1/4 in. width - Gives installers a verified size to compare with the top opening of the existing bin before ordering.
- 2-1/4 in. height - Helps buyers check vertical clearance where a cabinet trash bin lid may sit under a pull-out frame or cabinet opening.
- 15-1/4 in. depth - Provides a confirmed front-to-back dimension for fit checks in cabinet waste applications.
- Replacement bins and accessories product class - Signals that this item is intended as a service part or accessory rather than a full waste system.
- Rev-A-Shelf brand part - Helps buyers looking for a matching Rev-A-Shelf replacement bin lid stay within the same brand family.
- Sold per each - Lets buyers order the exact quantity needed for a single replacement or multi-bin maintenance work.
Confirm fit for your cabinet trash bin lid
Key specs to confirm: This black trash bin lid is listed for Rev-A-Shelf's 27 qt. waste container and measures 11-1/4 in. wide, 2-1/4 in. high, and 15-1/4 in. deep. Before purchase, confirm that your existing waste container is a Rev-A-Shelf 27 quart model and that the lid dimensions match the top profile of your current bin. For cabinet applications, also verify available clearance above the bin so the lid can sit properly inside the unit. Any unlisted fit, material, safety, load, or compliance details should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf black lid for a 27 qt. waste container, sold per each.
What to verify before ordering: Confirm brand, container capacity, lid width, height, and depth, plus the shape and edge profile of your current bin opening. Check whether you are replacing only the lid or also need the bin. Follow manufacturer installation guidance and local building requirements where applicable.
Match this black trash bin lid to your use
Use this cabinet trash bin lid in daily service
A replacement trash bin lid is often ordered after the original lid cracks, goes missing, or no longer matches the waste container in service. In a kitchen, utility room, or shop cabinet setup, that missing cover can leave the bin looking incomplete and may reduce the tidy appearance buyers want from a concealed waste area. This Rev-A-Shelf 27 quart lid is intended for that practical replacement need.
For installers, maintenance staff, and serious DIY buyers, the main job is simple: match the new lid to the correct brand and bin size before ordering. Rev-A-Shelf identifies this item as a lid designed for its 27 qt. waste container. That makes it relevant for buyers searching for a Rev-A-Shelf replacement bin lid, a 27 quart trash bin lid, or a cabinet trash bin lid for an existing pull-out waste setup. The verified dimensions - 11-1/4 in. wide, 2-1/4 in. high, and 15-1/4 in. deep - are the key numbers to compare against the current container.
This part also fits buyers who do not need to replace the whole waste system. If the bin itself is still usable, replacing only the lid can be a more direct way to restore the covered container. Because this item is sold per each, it also works for service calls where only one bin in a multi-bin arrangement needs attention.
When using this waste container lid in a cabinet application, confirm how the lid will sit within the existing waste area. Some buyers will be replacing a lid on a free-standing bin, while others will be using it inside a cabinet waste pull-out. The product data verifies the lid dimensions and intended 27 qt. Rev-A-Shelf fit, but buyers should still confirm the exact bin profile and any clearance needs in the cabinet before placing the order.
Compare replacement trash bin lid details with confidence
When comparing a replacement trash bin lid, the most useful details are usually the ones that prevent ordering mistakes: brand match, bin size, finish, and dimensions. This Rev-A-Shelf trash bin lid gives buyers those core facts clearly. It is a black lid, made for Rev-A-Shelf's 27 qt. waste container, and the listed size is 11-1/4 in. by 2-1/4 in. by 15-1/4 in.
That matters because many replacement parts can look similar in photos while differing in width, depth, or intended container family. A generic lid may appear close, but without a verified fit statement for the same brand and container size, buyers can end up with a part that does not seat correctly. Here, the product identity is specific: Rev-A-Shelf brand, RV Series trash bin lid context, and replacement accessory class.
Another useful buying point is that this item is sold per each. That supports straightforward ordering for one damaged lid, one missing lid, or selective maintenance across several waste containers. Buyers do not have to assume a pair or full set is included.
For trade buyers working through cabinet service parts, this kind of product is less about extra options and more about accurate replacement. The practical value comes from matching the verified dimensions and intended container size to the bin already in place. If your current setup is a Rev-A-Shelf 27 qt. waste container and the listed trash bin lid dimensions match, this part is aligned with that replacement need. If your bin shape, size, or brand is different, confirm the correct lid in technical documentation before ordering.
Ask fit questions before ordering this waste container lid
Will this lid fit any 27 quart trash bin?
This Rev-A-Shelf trash bin lid is designed for Rev-A-Shelf's 27 qt. waste container, so buyers should confirm brand and bin profile before ordering.
What are the dimensions of this 27 quart trash bin lid?
This 27 quart trash bin lid measures 11-1/4 in. wide, 2-1/4 in. high, and 15-1/4 in. deep.
Is the waste container included with this lid?
This Rev-A-Shelf replacement bin lid listing verifies one lid sold per each. A waste container is not listed as included.
Can I use this as a cabinet trash bin lid?
This cabinet trash bin lid can work in a cabinet setup if your existing bin is the matching Rev-A-Shelf 27 qt. waste container.
What color is this replacement trash bin lid?
This replacement trash bin lid is black.
How do I confirm compatibility before ordering?
This Rev-A-Shelf 27 quart lid should be matched by brand, container size, and the listed width, height, and depth.
Is this part part of the RV Series?
This lid is identified within the Rev-A-Shelf RV Series product family.
What should I check for installation clearance?
This waste container lid requires buyers to confirm space above the bin and fit at the bin opening. Follow manufacturer installation guidance and local building requirements where applicable.
Order the right Rev-A-Shelf replacement bin lid
Rev-A-Shelf replacement bin lid is a practical choice when you need to restore a matching cover to an existing 27 qt. waste container. Before purchase, confirm the black finish, the 11-1/4 in. x 2-1/4 in. x 15-1/4 in. dimensions, and that your current bin is a Rev-A-Shelf 27 qt. model. This listing verifies one lid sold per each, so check whether you need only the lid or a complete bin replacement to avoid delays and ordering errors.