Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand member of the Salice Futura concealed undermount system in the 380mm (15 inch) length — a roller-bearing runner built for drawer boxes with 1/2 to 5/8 inch sides, sold as a single handed piece for shops that stock lefts and rights separately.
The 380mm Futura right-hand runner is the correct piece for the right side of a cabinet opening carrying a 15 inch drawer box. In a typical shop workflow, this SKU and its left-hand counterpart are stocked in matched quantities so one of each goes to every drawer. Because the Futura system uses brand-specific fixing clips at the front — not a generic locking device — the drawer box must be built and drilled to Salice's published specification for this series: correct nominal length, box-width formula, bottom recess, rear notch, and clip-drilling pattern. A box that is not built to spec will not seat correctly on the runners.
This runner suits frameless European-style cabinet construction. If the project calls for face-frame cabinets, confirm a face-frame version or the appropriate rear mounting bracket before ordering — rear support behind the face frame is required, and brackets are series-specific to the Futura line.
The runner body is steel with a zinc finish, which handles the indoor service life of a production cabinet without adding cost or complexity. The roller-bearing carriage keeps travel smooth and quiet across the drawer's range of motion. Because the Futura runner is fully concealed beneath the box, the finish is functional rather than decorative — it will not be visible once the drawer is installed.
This bulk single is the right choice for cabinet shops running Salice Futura in volume production. Ordering individual left-hand and right-hand members lets a shop manage its own inventory levels for each side rather than buying pre-paired sets. Designers and contractors specifying Futura for a European-style kitchen or bath remodel will need one left-hand and one right-hand runner per drawer, along with the appropriate Futura front fixing clips and any motion accessories required by the project.
No. This is the right-hand member only. Order the matching left-hand 380mm Futura runner separately — one of each is required per drawer.
Futura front fixing clips are series-specific accessories and are typically sold separately. Confirm clip inclusion for this SKU at the time of ordering and make sure the clips are Futura-series parts — clips from other undermount brands will not fit this runner.
This version is engineered for drawer sides from 1/2 inch to 5/8 inch (approximately 12.7mm to 16mm). If the project uses 3/4 inch drawer sides, a different Futura model is needed — the 5/8 inch and 3/4 inch versions are not interchangeable.
The motion feature for this specific Futura variant is not confirmed in the available product data. The Futura line includes Smove soft-close, self-closing, and Futura Push (push-to-open) models — verify which motion version this SKU carries before specifying it for a handle-less or damped-close application.
The Futura line includes face-frame configurations, but this SKU's cabinet-type compatibility is not confirmed in the current data. For face-frame work, confirm that this is the face-frame version, or that the correct Futura-series rear mounting bracket is available and ordered alongside it.
Stocking Futura right-hand and left-hand runners as separate line items gives a production shop precise control over inventory — no paired sets sitting half-used when run quantities are odd or one side wears before the other.
Sold In: 20 Each