Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand cabinet member of the Salice Futura concealed undermount system in the 480mm nominal length, made for drawer boxes with 1/2 to 5/8 inch sides. Order it with the matching left-hand slide to complete one working pair per drawer.
The Futura 480mm right-hand slide fits into the production workflow for European-style frameless cabinetry where metric sizing drives the drawer layout. Cabinet shops running CNC or line-bore equipment specify Futura by millimeter length rather than inch increments, and the 480mm size targets drawer boxes in the 18 to 19 inch depth range built to the Salice box specification. The concealed runner suits kitchen drawers, bath vanities, and furniture pieces where a hardware-free interior is part of the design intent. Because the slide mounts beneath the box, the drawer interior is clean on all four sides — no visible tracks, no exposed steel when the drawer is pulled open.
Steel members with a zinc finish provide dependable corrosion resistance for indoor cabinetry environments. The roller-bearing carriage runs quietly under load and keeps travel consistent over repeated cycles. Because the slide is hidden under the drawer box in normal use, the zinc finish is functional rather than decorative — it protects the steel through years of service without contributing to the visible aesthetic of the interior.
Production cabinet shops and custom millwork operations that stock Futura components by the single member will find this the straightforward way to replenish right-hand inventory independently of left-hand stock. Designers and contractors specifying Salice Futura for frameless European-style casework should note that this slide requires a drawer box built to Salice's published specification for the series: nominal 480mm length, correct box width for the 5/8 inch side-thickness version, bottom recess, rear notch, and drilling for Futura-specific locking clips. An off-spec or wrong-width box will not seat correctly on this runner. Futura fixing clips and rear brackets are series-specific and do not interchange with other brands or slide lines.
480mm is the nominal slide length in the Salice Futura metric system. The Futura line is sold in millimeter increments; do not substitute an inch-sized slide for this length. The drawer box depth is specified by Salice in millimeters for this series.
Yes. This SKU is the right-hand member only. You need one right-hand and one left-hand 480mm Futura slide to run a single drawer. Ordering two right-hand slides will not produce a working set.
Futura front locking clips are sold separately and are series-specific. Confirm the correct Futura fixing clips for this series before completing your order, as clips from other undermount brands will not fit this runner.
This is the standard frameless version of the Futura runner. Face-frame cabinet construction requires a different configuration with rear mounting bracket support. Check the Salice Futura line for a face-frame version if your cabinets have a solid wood front frame.
This version is made for drawer sides from 1/2 inch (12.7mm) to 5/8 inch (16mm) thick. For 3/4 inch (19mm) sides, select the Futura model specified for 15 to 19mm material instead — the two versions are not interchangeable.
Stock the Futura right-hand 480mm slide alongside its left-hand counterpart and your Futura fixing clips, and the concealed runner side of the drawer build is covered for every cabinet in the run.
Sold In: 20 Each