Salice Futura 380mm undermount drawer slides provide a soft-close, full-extension runner for drawer opening applications where smooth travel and controlled closing are important. These undermount drawer slides from Salice America are classified as Futura, so they serve both partial and full-extension uses, which helps standardize hardware selection across different cabinet lines using the same runner family. With a load capacity of 75 lbs (34 kg) dynamic and 100 lbs (45 kg) static, tested to ANSI Grade 1, these slides support everyday residential or light commercial drawer loads while maintaining performance under motion. The full-extension action lets the drawer clear the cabinet face, improving access to stored items and reducing the need to reach into the cabinet. Smove decelerated closing slows the final part of the stroke, reducing slam impact on the drawer box and cabinet, which supports long-term alignment of fronts and joints.
These Salice Futura undermount drawer slides use clip-based adjustments to fine-tune drawer position after mounting, which helps installers dial in reveal lines without rebuilding boxes. With clip A710.610, drawer height adjustment of plus 2.5 mm is available, giving upward movement to correct sagging reveals or align with neighboring fronts. Using clip A750.010, the system offers drawer height adjustment of plus 2.5 mm, side adjustment of plus or minus 1.5 mm, and depth adjustment of plus or minus 2 mm, so the drawer can be tuned in three planes relative to the cabinet face. These adjustment ranges help correct small drilling tolerances or material variations that typically appear in shop-built cabinetry, reducing rework and speeding up final installation.
The Salice Futura 380mm soft-close full-extension undermount drawer slides fit drawer opening applications that call for the drawer to extend fully out of the cabinet while keeping hardware concealed below the box. Because Futura is suitable for both partial and full-extension uses, these slides integrate into projects that may mix shallow utility drawers and deeper storage drawers while staying within the same runner platform. The 380mm length works where cabinet depths allow this nominal size, supporting common base or wall unit layouts that match European-style metric planning. With ANSI Grade 1 load ratings of 75 lbs dynamic and 100 lbs static, these slides suit drawers that carry everyday loads without entering heavy industrial ranges, which helps balance smooth operation with efficient hardware sizing. The bright zinc-plated finish fits indoor woodworking environments such as kitchens, baths, office furniture, and built-ins where corrosion resistance and clean appearance of the slide hardware matter during service and future adjustment.
The drawer height adjustment of plus 2.5 mm achievable with clip A710.610 means that if a drawer front sits slightly low after first install, it can be raised without reshaping the box, saving bench time on fine corrections. When clip A750.010 is used, the combination of plus 2.5 mm height, plus or minus 1.5 mm side, and plus or minus 2 mm depth adjustment allows installers to shift the drawer box up, sideways, and in or out relative to the face frame or cabinet front edge. This multi-axis adjustment window addresses typical on-site issues such as minor out-of-square openings or small errors in drilling patterns, giving a controlled way to tighten reveals and correct racking in a few tool operations. Smove decelerated closing slows the final millimeters of travel, so even when a user pushes the drawer with force, the motion settles into a controlled close, reducing impact stress transferred into slide members. Over time, this moderated closing behavior supports consistent slide performance and helps maintain alignment of drawer fronts with adjacent doors and panels in a bank of cabinets.
The Salice Futura 380mm soft-close full-extension undermount drawer slides are suitable for drawer opening applications needing partial or full-extension travel, which covers a wide range of cabinet storage layouts.
The Salice Futura 380mm undermount drawer slides support 75 lbs (34 kg) dynamic and 100 lbs (45 kg) static loads, ANSI Grade 1, which defines realistic working limits for typical cabinet drawers.
The Futura system with clip A710.610 provides drawer height adjustment of plus 2.5 mm, allowing upward movement of the drawer front to align reveals without rebuilding the drawer box.
With clip A750.010, Salice Futura 380mm undermount slides offer plus 2.5 mm height, plus or minus 1.5 mm side, and plus or minus 2 mm depth adjustment, helping fine-tune drawer position in three directions.
The Smove decelerated closing on Futura slides slows the final part of drawer travel, reducing slam impact on the drawer and cabinet, which supports smoother operation over repeated use.
The Salice Futura 380mm soft-close full-extension undermount drawer slides have a bright zinc-plated finish, which protects the metal surfaces in typical indoor cabinet environments.
The Salice Futura 380mm soft-close full-extension undermount drawer slides, part number A6555-380 with manufacturer part UBA6555-380, deliver ANSI Grade 1 load performance, Smove decelerated closing, and clip-based height, side, and depth adjustment. These verified features work together to support precise drawer alignment, concealed undermount hardware aesthetics, and controlled closing behavior across a range of cabinet drawer opening applications. Selecting this Futura runner solution sets a consistent platform for 380mm-deep drawers where soft-close action, full-extension access, and tunable fit are required in professional woodworking projects.
Sold In: 20 Set