Cube Cabinet Fastener Kit for 3 Cube Cabinet is a hardware set designed for hanging or wall mounting 3 cubes in the Federal Brace cube system. Because it is matched to Federal Brace cubes, the kit aligns with their cube layout, helping installers set up consistent cube runs. The 6 inch by 1/4 inch - 20 fasteners give a defined length and thread size, supporting repeatable drilling and fastening on jobs that use the same cubes. The kit is identified by manufacturer part number FB-08521, so shops can reorder the same setup for future cube projects. Being part of the Shelf, Closet & Garage Organization category positions this kit for cube storage layouts where wall-mounted cubes act as shelving. As a product in the Shelf Brackets class, the fastener kit works as the connection between Federal Brace cubes and their supporting structure during mounting.
The hardware set for hanging or wall mounting 3 cubes focuses this kit on wall-mounted installations where Federal Brace cubes act as storage modules. Because the fasteners are 6 inches long with a 1/4 inch - 20 thread, installers can base drill depth and alignment on that consistent fastener profile across the three-cube run. The Cube Cabinet Fastener Kit is designed to be used with Federal Brace cubes, so the mounting approach follows the geometry and mounting provisions of that specific cube line. As a Shelf Brackets class product, the fastener kit supports the load path from the cube cabinet body back to the mounting surface, allowing installers to treat it as part of the bracketed support structure.
The Cube Cabinet Fastener Kit is designed to be used with the Federal Brace cubes, which places its use directly in projects built around that cube system. Because the hardware set is identified as for hanging or wall mounting 3 cubes, it aligns with layouts where three Federal Brace cubes are arranged as a wall-mounted storage group. The 6 inch fastener length suits the depth demands of the cube cabinet setup, providing a consistent shaft length that passes through cube structure and into the supporting surface or bracket arrangement. As part of the Shelf, Closet & Garage Organization category, the kit supports storage builds ranging from closet cubes to garage cube shelving, where Federal Brace cubes function as modular storage blocks.
The 1/4 inch - 20 thread on the 6 inch fasteners gives fabricators and installers a common thread size to work with, simplifying bit and tap selection on jobs that repeat Federal Brace cube layouts. Because the hardware set is dedicated to hanging or wall mounting 3 cubes, it focuses planning around three-cube configurations, helping maintain consistent spacing and mounting methods across similar projects. The presence of a NOMARR on every fastener protects the bracket finish from scratches as fasteners are tightened, which helps keep visible bracket surfaces cleaner when cubes are used in open closets, living areas, or garage walls. With manufacturer part number FB-08521, shops can standardize this specific cube cabinet fastener kit in their internal parts lists, supporting consistent results every time Federal Brace cubes are mounted.
The Cube Cabinet Fastener Kit is designed to be used with the Federal Brace cubes, so its dimensions and hardware intent match that specific cube cabinet system.
The hardware set is described as a hardware set for hanging or wall mounting 3 cubes, so it is intended for three-cube cabinet configurations.
The fasteners in the Cube Cabinet Fastener Kit are described as 6 inch by 1/4 inch - 20, providing a specific length and thread size for planning installations.
The kit is stated to have a NOMARR on every fastener, protecting the bracket finish from scratches as the fasteners are tightened against bracket surfaces.
The Cube Cabinet Fastener Kit is described as a hardware set for hanging or wall mounting 3 cubes, focusing it on wall-mounted cube cabinet storage layouts.
The Cube Cabinet Fastener Kit uses manufacturer part number FB-08521, which allows shops to specify the same kit when planning repeat Federal Brace cube projects.
The Cube Cabinet Fastener Kit for 3 Cube Cabinet gives installers a defined 6 inch by 1/4 inch - 20 fastener setup that is designed to be used with Federal Brace cubes. Because the hardware set is focused on hanging or wall mounting 3 cubes, it fits cube-based storage layouts where three units form a stable group. With a NOMARR on every fastener protecting bracket finish from scratches, the kit supports clean-looking bracket installations in closet, shelf, and garage cube projects.