Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Federal Brace NOMARR cover cap is a white PVC peel and stick surface protector designed to shield finished surfaces from scratches, scrapes, and marring created by driving tools used with fasteners. The patent pending NOMARR non-marring surface protection technology helps keep visible faces of your work free of tool marks as you install or assemble. Its inexpensive design supports jobs where appearance matters across larger runs without driving up cost per fastener. By adding NOMARR to your fasteners, you reduce the chance that driving tools will compromise the final finish on cabinets, furniture, or fixtures. The 1.25 x 0.75 x 0.13 inch profile gives ample coverage around the fastener area so the driving tool contacts the cap, not the finished material, supporting a consistent, professional look.
This NOMARR surface protection cap is sized for fastener shaft diameters from 1/4 inch to 5/16 inch, so it works in the common range used on many cabinet, furniture, and fixture installs. Matching the shaft range helps the cap center properly around the fastener, which keeps the driving tool working within the protected area instead of contacting finished material. The cap is also specified for socket diameters from 3/8 inch to 7/16 inch, aligning with typical driver and socket sizes for those shaft ranges. When shaft and socket dimensions fall inside this range, the 1.25 x 0.75 x 0.13 inch profile has room to shield the surrounding surface while fastening proceeds at normal speed.
The NOMARR surface protection cap is designed for use wherever finished surfaces are at risk from tools driving fasteners during installation and assembly. Its role in the fasteners, screw cover caps, and washers class means it is meant to sit at the fastener location as a protective interface. On finished cabinet faces, the white PVC cap covers the area immediately around the fastener head so sockets, bits, or drivers contact the cap instead of the door, frame, or panel surface. On furniture or fixture installs, the 1.25 inch by 0.75 inch footprint spreads that protection across a wider zone, which matters when tool alignment varies slightly from one fastener to the next.
Because it is non-marring surface protection, NOMARR works in situations where visible laminate, paint, or coated surfaces could show even light tool contact. The 0.13 inch thickness gives a defined buffer between the driving tool and the finished substrate, so the driving force is transferred through the cap rather than directly onto the surface. In assembly workflows where multiple trades or workers may drive the same style of fasteners, this consistent protective layer helps maintain finish quality across many hands on the job.
The specified dimensions of 1.25 x 0.75 x 0.13 inch give the NOMARR cover cap enough area and thickness to function as a stable protective pad around the fastener. That footprint supports accurate placement over the fastener location while still letting tools access the shaft and socket sizes inside the 1/4 to 5/16 inch and 3/8 to 7/16 inch ranges. By aligning cap size to these common ranges, installers can move from one fastener to the next with consistent tool feel, instead of adjusting technique for each protection point.
Using a peel and stick attachment method also supports repeatable results, since each FB-02391 NOMARR cap adheres in the same way regardless of orientation. The PVC material combined with the white color keeps the protective area defined but visually clean around the fastener location. As driving tools engage within the socket diameter range, the cap absorbs incidental contact and abrasion. This protects the finished surface from the cumulative effect of many installations, which is critical on larger projects where surface quality must remain uniform from the first fastener to the last.
The NOMARR surface protection cap shields finished surfaces from scratches, scrapes, and marring created by driving tools at the fastener point, helping preserve visible cabinet, furniture, or fixture faces.
The FB-02391 NOMARR cap is specified for shaft diameters from 1/4 inch to 5/16 inch, so it fits common fasteners in that range used in many installation and assembly tasks.
This NOMARR surface protection cap is designed for socket diameters from 3/8 inch to 7/16 inch, allowing typical drivers in that range to operate while the cap protects surrounding finished material.
The peel and stick NOMARR cap applies directly over the fastener area, letting installers position non-marring protection quickly while maintaining an efficient fastening workflow.
The Federal Brace NOMARR cover cap measures 1.25 inches by 0.75 inches by 0.13 inches, providing a defined protective zone around the fastener to keep driving tools off the finished surface.
As a screw cover cap and washer class product, NOMARR works at the fastener location to protect and visually finish the area during installation and assembly.
The Federal Brace NOMARR 1.25 x 0.75 x 0.13 inch white PVC peel and stick cover cap gives installers a simple way to protect finished surfaces while driving fasteners. Its non-marring surface protection, shaft and socket diameter ranges, and patent pending design support consistent finish quality on cabinet, furniture, and fixture work. For projects where fasteners are driven directly against visible faces, NOMARR FB-02391 provides a defined protective zone so tools can do their job without marking the surface.
