
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS01547UF1 to RSFS01547UF1.
Omega National white oak floating shelf gives you a 2-1/2 inch thick, 10 inch deep, 54 inch long solid-looking shelf that works well in transitional and contemporary kitchen and bath layouts where a clean, open wall run is needed. The shelf uses a concealed hanging system, so the support stays out of sight and the installation presents as a true floating shelf in finished spaces. The shelf is built with solid wood and wood veneer construction, providing a wood-based component suited to typical cabinet and closet environments. The rift white oak surface is offered ready-to-finish, letting you match stains or clear finishes to surrounding casework and trim. This model is made in the USA and identified by manufacturer part number FS01547UF1, which supports ordering and reordering the same specification.
The Omega National Products floating shelf is part of a complete turn-key system that uses hanging brackets for mounting, so the load transfers back to the wall through a dedicated concealed support. The shelves are built at 2-1/2 inches thick and 10 inches deep, giving adequate section to conceal the brackets while presenting a clean front edge. The hanging system rating of 15 lb per running foot gives you a defined load capacity during layout, which helps when spacing multiple shelves on a wall. Because the shelf can be trimmed from 10 inches down to 2 inches in depth, the installer can size the projection for backsplashes, narrow passages, or shallow wall sections without changing the length.
This Omega National Products floating shelf sits in the Shelf, Closet & Garage Organization category and is also part of Floating Shelves and Concealed Brackets, positioning it for open wall storage in kitchen, bath, and similar interior spaces. The 54 inch width and 10 inch depth suit wall runs above counters or in closet sections where open storage and display are needed. The rift white oak face matches projects that call for linear grain oak in transitional and contemporary kitchen and bath styling, tying into other rift oak fronts or panels. Because the shelf is made in the USA and carries the FS01547UF1 part number, specifying and repeating this exact configuration across multiple rooms or projects stays straightforward.
The solid wood and wood veneer construction means the Omega National white oak floating shelf uses wood-based materials throughout, giving a familiar substrate for on-site finishing with stains or paints suitable for rift white oak. The hanging system rating of 15 lb per running foot, combined with the 54 inch length, provides a predictable performance benchmark that exceeds KCMA requirements, which matters when designing open shelving to hold everyday items. The 2-1/2 inch thickness and concealed brackets work together so the structural support remains hidden, yielding a clean floating appearance that can be repeated across a wall line with consistent results. The ability to trim the depth from 10 inches down to 2 inches offers flexibility to adjust projection while keeping the overall shelf identity and load rating framework, helping maintain a coordinated look even when wall conditions change from section to section.
The Omega National white oak floating shelf is 2-1/2 inches thick, 10 inches deep, and 54 inches long, giving a substantial profile suitable for open wall storage runs.
The hanging system safely supports 15 lb per running foot of shelf length, providing a defined load rating that exceeds KCMA requirements for wall-mounted shelving.
The floating shelf can be trimmed from its 10 inch depth down to 2 inches, allowing the projection to be adjusted to suit specific wall or backsplash conditions.
The shelf uses solid wood and wood veneer construction in ready-to-finish rift white oak, so it can be finished on site to coordinate with surrounding woodwork.
The Omega National white oak floating shelf is made in the USA, which supports projects that prioritize domestically manufactured wood components.
The shelf is intended for todays transitional and contemporary kitchen and bath styling, providing open wall storage and display with a concealed support system.
The Omega National white oak floating shelf FS01547UF1 combines a 2-1/2 inch thick, 10 inch deep, 54 inch long format with a concealed hanging system rated at 15 lb per running foot, aligning with open-shelf kitchen and bath designs. The ready-to-finish rift white oak face and solid wood and wood veneer construction support on-site finishing alongside surrounding cabinets. The ability to trim depth down to 2 inches adds flexibility for real-world wall conditions. For projects that call for made in USA floating shelves with a defined performance rating, this model provides a consistent specification to carry across multiple rooms.
Sold In: 1 Each